Chosen Solution MacBook Pro not charging and it goes off once I disconnect from a power source Your Coconut Battery APP is showing that the battery is not charging and its condition is Poor. The first thing to do would be to replace it: MacBook Pro 13" Unibody Mid 2012 Battery Replacement
Chosen Solution I’ve decided to take apart my old android phone, and since I’ve been in a great shortage of batteries for my high energy requiring protable projects, I was wondering If I colud use my phone batteries, that are quite capable in terms of Ahs. I know the hazards of li ion batteries, and the difficulty in charging them, and I’ve attempted a solution by using the phone very charging circuit, or actually the pcb containing the usb port and the battery terminals....
Chosen Solution I am trying to replace the screen on my Moto X Pure but the screws are made out of the worst metal ever and many of them have become completely stripped? I was using a Torx T3 and T4 screwdriver. Is there a good way / tool to get these out? I have already tried the rubber band and tape method. The other day i ran into the same problem as you....
Chosen Solution My Mac book pro mid 2012 stopped working. Seemed to be a battery issue since last time I was able to turn it on it worked fine. I bought a second hand Mac book pro (same vintage) but it was sent without a hard drive. I am away on holiday and don’t have access to my old old Hard Drive. I’m trying to install my SSD from my previous laptop without erasing everything....
Chosen Solution I was using my TI 84 plus C silver edition calculator when it suddenly turned off. Now it’s not turning on. When I charge it the light flashes but the screen won’t turn on. Any help please??? do you have a multimeter so you can test the charger? try doing that. it might be your charger cable or plug isnt putting the charge through properly
Chosen Solution I was driving home and my car just shut off on me I try turning it on again but it won’t start it cranks but won’t turn on can anyone help me out is a Honda Accord 1998 3.0 engine Leave it overnight so it is cold in the morning when you go to start it again. If it starts when cold but shuts off when hot. Change out your crank position sensor....
Chosen Solution Like it said on the title, my iPhone won’t turn on. I tried sleep/home button but only apple logo would turn on for 3 seconds and black screen. If it only turned on for 3 seconds, it has nothing to do with the system itself. Probably has to do with the battery, try plugging it into a lightning cable and turning it on. If that doesn’t work, plug into iTunes hold the home button while it starts up and try to put it into recovery mode....
Chosen Solution My home button doesn’t work for a start and it keeps telling me to connect to itunes and when i connect to itunes it tells me i have to put the password in which it won’t let me cause it says connect to itunes is there anyone who can help me? Does the iPhone say disabled connect to itunes? If yes, the only way you are going to get that restored with a bad home button is through 3UTools (Under multiple flash option, it allows you to reboot the phone into recovery automatically after downloading the firmware) but I strongly recommend getting the home button replaced then restoring the iPhone via recovery mode normally through iTunes....
Chosen Solution I have not spilled anything on the keyboard.it is a rca viking pro tablet laptop,but sometimes when I press a key it will type out 4 or 5 times of that letter.all the keys on keyboard do this,I even have problems adjusting the volume using keyboard. Try to use a vacuum or something to get stuff out from under the keyboard. It can also be that something broke and you need to replace it....
Chosen Solution My laptop wont turn on, after I plug in the charger the charger display lights up, the power button is flashing and every once in a while I try to hold the power button and that just lights up the keyboard nothing else, I tried to use a pin to press the small buttons but nothings working Hi, Try a full power refresh and check if this resolves the problem....
Chosen Solution its keeps beeping the screen is black when i open it up its black and that s all it does is beep sounds like memory problem. Try reseating the memory, take them out and put them back in. They also can be defective Dell Inspiron 3520 RAM Replacement black screen and beep problem i am already check and done all kind of solution like ram change , ram jack change, hard disk change cell change, all open the laptop and remove the fan on the processor and clean the processor chip and give the head 4 minutes and use thermal grease and re installed all equipment and check the laptop again on the laptop but problem the same …....
Chosen Solution Hello, I’ve tried almost everything and nothing’s working I press the power button and the led light is blinking and o hear beeps I believe it’s from bios and I’ve tried hard resetting it and that’s not working everytime I start it up it stays on the hp screen then it goes to automatic repairs and the blank screen with a cursor.also I’ve been into the f2 settings and I ran a quick test and it say the hard drive short dst failed and at the bottom it says hard drive 1-Primary HDD Bay* Thank you for your help....
Chosen Solution When my phone fell into water it suddenly turns black .it only vaibrates when i hold power button and volume button Hi @redeye007 The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. The corrosion starts immediately and is ongoing until it is completely cleaned away First do not try to charge or to turn on your phone and then remove the battery as soon as possible from the phone to minimize any further damage....
Chosen Solution My phone never work or charging because the problem is is power Search eBay for logic board , or for a phone with broken screen to pull from it, if this is the issue, and double check the battery.
Chosen Solution Hi Guys..This is my first Question on this website..I have a Samsung Galaxy S2 Plus (Gt i9105) with Android 4.1.2 Jelly Bean.. i wanna upgrade it to Kitkat but it was not officially Avaiable..Any Help??? Thanks Hi Guys..This is my first Question on this website..I have a Samsung Galaxy S2 Plus (Gt i9100) with Android 4.1.2 Jelly Bean.. i wanna upgrade it to Kitkat but it was not officially Available…....
Chosen Solution It was broken and after I sent it to repair, I was told its died. So I can only copy the memory out. However, the computer repairing staff said there is only one SSD is readable and the data are broken as well. Hes trying to recovery. Other 2 SSD is not readable. Any ppl knows how to solve this problem? it’s almost impossible to recover data from a broken drive, you need to pay a fortune to experts to dig inside tiny chips and it doesn’t guarantee that you find all your data if any, all you need to do is to pray for some miracle :)....
Chosen Solution When my ASUS vivobook 14 is in hibernation mode it sometimes (happened 2 times in the least two weeks) overheats with fans on high. When I open the lid the laptop won’t turn on automatically, and the power light is blinking. I had to do a reset (20 seconds of holding the power button) to turn it on again. Furthermore, it seems that my battery capacity went down....
Chosen Solution I just updated my windows and now the laptop won’t start until I plug it in first Hi, First with the laptop on and working create a Win10 battery report to check the status of the battery to eliminate it as the problem just in case it is coincidental that this occurred after an update. Check the design capacity versus the full charge capacity information. If the battery appears to be OK then try to get into the WRE (Windows Recovery Environment) menu area....
Chosen Solution Looks like hydro fluid on inside and outside of back wheel. What seal do I most likely to ask for when getting seal ? You can actually find a pretty good seal call FlexSeal at almost any hardware store. It might work for what you’re doing here.
Chosen Solution Hello, my LG Washer/drier 12/8kg, model FH6GIBCHK6N was about 20 minutes into washing when my child switched it off, having a reading of 1:49mins remaining. When I just switched it on, the timer now reads 4:48 mins remaining. I thought that the memory would have picked it up from where it was. Is there a way to prevent this from happening or how should I reset it to back where the timer was?...
