Chosen Solution Ever time I put in the charger in the charging port I do not get a charging signal Hi, Have you tried a different known working compatible charger or USB-C cable to prove that the problem is in the charge port, you didn’t say? Visually inspect the charge port using a strong light and a magnifying glass to check that there is no lint etc in the port that may be preventing a good electrical connection....
Chosen Solution Hi my MacBook is not working after liquid damage, I clean it out however the magasave light is a softer green and the battery indicator first blink one led and then all 8 when pressed again. The MacBook does not want to start up. @happysingh - remove the battery and try to power on computer directly connected to magsafe. You may need to perform SMC reset if magsafe light is not green....
Chosen Solution The display seems to either flop forward or backward slightly depending on how i position the display. Is there a way to fix this? Check this out: Fix A Wobbly MacBook Pro Step by Step Repair Guide on how to get to the hinges: MacBook Pro 13" Unibody Early 2011 Display Replacement
Chosen Solution My dv 2000 isn’t locating any wifi and the wilan light is not coming on,help pls?? Does this have Vista on it? If so, youll need to download the newest wifi driver and update it. I have seen this issue on several Vista based laptops. Also, follows these possible solutions. Some HP’s have a wifi switch on the side or near the front. Flip that on. These can be turned on accident....
Chosen Solution My laptop can produce sound, disregarding the fact that i updated the sound-drivers when i i connect the headsets, but the pc’s speaker does, but it dos not work with headsets. Hi, Have to ask, you did try another set of headphones didn’t you? It may be that there is a faulty or loose audio output socket in the laptop. Unfortunately it appears as though the socket is directly mounted onto the motherboard....
Chosen Solution Lg aristo fell in water Hi @gatorfan73 , The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. The corrosion process starts immediately and continues until it has been cleaned properly First do not turn on your phone and then you need to remove the battery as soon as possible from the phone to minimize further damage....
Chosen Solution Whenever I insert my movie, the screen stays blue. How can I fix this? Check your AV connectors and ensure they are plugged into the proper AV ports. If everything checks out with your AV cords and the problem still persists, take a look at your TV settings and make sure it is in the proper display mode.
Chosen Solution My PC would turn on and it shows light on the power button. I noted some liquid in my PC after opening it. And it wouldn’t turn on . Even the fan are not rolling. liquid in PC not good. It shorts things out and can eat thru component wires and PCB traces if it is other than tap or rain water. Wine and Coke are very bad. Salt water is also bad....
Chosen Solution Is there a fix to the camera, keeps closing saying error code 01 number. Also, this phone keeps saying UI error or something similar have you recently updated your phone to its newest software? this could cause the phone to have some errors. if that is not the issue you may need to replace your camera on the phone. hope this helps,
Chosen Solution SIM card un readable Hi, Try using another known working network compatible SIM in your phone and check if it works OK. Try using your SIM card in another network compatible phone and see if it works there OK. Basically swap SIM cards between two same network phones and check what works where. Has the phone been dropped or gotten wet at all?
Chosen Solution I had insurance on my new Galaxy Core, I lost it at Walmart a month or so ago. So I’ve only had it for about 3 months. It just quit turning on. I had the battery checked and it had a full charge. Verizon said I was on my own. Now I’m locked into a bunk program, which I find out is the most expensive that charges an arm and a leg for the stuff others give for free....
Chosen Solution I have an Acer Nitro 5 AN515-53 laptop. The charging light does work, and it is even fully charged, however pressing the power button does not cause any reaction what so ever, the keyboard doesnt light up, nor does the screen or the power led. I’ve tried disconnecting and reconnecting the battery and the cmos battery, and there is no change. Does anyone have a solution? How old is the battery?...
Chosen Solution So today I was replacing an iPhone 6 Black screen and when I turned on the phone the backlight turned on but no screen and then everything went blank. Tried everything. Disconnecting the battery, putting the old screen back on etc etc. I use anti static watches, gloves and plastic bits on the actual phone. I have also been fixing phones for over 3 years and this has never happened to me....
Chosen Solution My Dad is trying to fix my Lenovo G50-30 and the problem is that when the laptop powers on the power led for 2 seconds and it shuts down. Anyone knows what the problem is? The Graphics Card Is Dead And Not Working U Can Repair It With 35$
Chosen Solution My LG phone is pretty new but sadly this starts happening… picture 1 : http://imgur.com/7WZQ8ZP picture 2 :http://imgur.com/pCx3b6R video : https://vid.me/lwes After I use the phone for 5 or 10 minutes this thing starts happening. It’s very annoying. I tried to change the flex cable but same result . Hi, It seems as if the digitizer might be playing up. Since you say that it is pretty new I suggest that you check the Warranty period of your phone and if it is still valid, contact the manufacturer’s customer support section regarding a Warranty repair/replacement....
Chosen Solution Hello, as of yesterday my LG 43uk6470plc TV has an issue. I read some similar posts but none that match the exact issue I have. After turning it on, there is a fade out to black from left to right in about one second, just long enough to show the channel number in the upper right cornerThe backlight is still on, no image can be seen with a flashlightAudio still worksThe red LED on the bottom blinks a few times on start-up I’ve left the power off over night which didn’t make a difference....
Chosen Solution Hi all, I am attemping to rebuild my powermac G5 LCS. It wasn’t leaking or anything, just preventive maintenance after all those years. I have the mac fully disassembled and LCS disassembled as well. It’s deplhi model (one pump) DDC3.1. The hoses didn’t want to come off so I had to cut them and will be replacing them soon. But I noticed there are little tiny filters on the input (maybe also on the output) of each processor block passthourgh....
Chosen Solution I just got a Mac Pro and I’ve been using Windows on it but I wanted to do video editing so I decided to use macOS but when I tried to boot into recovery it didn’t give a mac choosing screen and it wouldn’t let me boot from CD or USB, I couldn’t even get it to boot to startup manager. Can anyone help? System specs: dual Cpu Intel Xeon, 10 gigs ddr3 ram, 1 tb hard drive, and a different graphics card (Pegatron graphics card I think,I have a feeling that is the problem because the one that came with it died eventually)...
Chosen Solution Hello, I have a problem with my mid 2013 MacBook Air, I’ve made an update from macOS from Mojave to Catalina. During the update something happened, when I gone back to my Mac I saw only black screen with backlight. I didn’t touch it for whole night, at the morning Mac was at this same state. I decided to force turn off with power button and now it’s not booting....
Chosen Solution As the title says, my MacBook is only charging with low wattage, there are two screenshots from coconutBattery attached. It might have something to do with battery, as the computer was not used in almost a month. A service provider has tested every component and they said it is a faulty battery. Have any of you had this problem? What did you do to fix it? Update (10/04/2016) Apparently, the problem is within the logic board, the computer was dropped before and I guess some connections could have broken....
