Chosen Solution Hi, as mentioned i have a problem with my aux. Recently i have purchased a used car stereo and it had a aux cable coming from the housing. I’ve connected it to the car and when I plugged in my phone nothing happened. I tried a bunch of things but I couldn’t play music. Finally I got out my multimeter and found out that there were 12V on the aux jack....
Chosen Solution My controllers mini usb port has broken and it is not charging ….How do i replace the port ps. i konw how to solder etc and i have an woring port i can replace it with I’ve never replaced the USB on a dual shock before but I have repalced many USB connectors on phones. Shouldn’t be any different. Your soldering knowlage should carry you to success. Before you do any work on it make sure you do your research as well as just looking at how the board and usb are soldered....
Chosen Solution My granddaughters table just stopped loading, if you try turning it on the screen goes to the RCA logo screen and just stays there, it will sit there for a few minutes and then turn off only to start back up and stop at the logo screen. I have tried to reset it but nothing happens, pushing the reset is the only way to turn it off completely....
Chosen Solution when i want to restore my iphone 5s and i had that error from iTunes “there was a problem downloading the softwere for the iphone”, then i connected my iphone 5s to iTunes with DFU Mode and i pressed and keep holding BOTH Home and Power button until about 1-2 seconds after the device switched off, then i got (Restore iPhone) in iTunes and i hit (Restore iPhone), then my iphone won’t turn on or charge (now after i connect it to itunes i get that “iTunes currentmy downloading software for the iphone”) Please help...
Chosen Solution ok, I have an iphone se, I lent it to my nephew so he can play some games, when I got the phone back it had no battery, so I put it to charge… and nothing happened, the icon of battery did not appear and in general he just died. What could have happened? (no, he didn’t get wet or anything) The most common cause for this issue is a faulty battery....
Chosen Solution i’m from the philippines and we bought our keurig in states so our keurig is 110 and our plugs are all 220 so we have to use a transformer/converter. But, all of a sudden it won’t turn on. Is there any service center for keurig here? or what can I do to fix this. We have been using our keurig for almost 7months. You have tested the converter output is still providing a proper 110 AC ?...
Chosen Solution My laptop stopped working one day and refused to turn on by all means. I tried all the solutions that worked for other people with the same problem and nothing worked. There was no fan working so not only wasn’’t the display working, but also the laptop itself. When I tried to plug it in, the light inidcated to me that it was charging though. Nothing worked for 8 months and one day, I don’t know what made me try and turn it on again, it worked....
Chosen Solution i have Samsung washing machine top loader when i start washing it give me sound like is washing but wail is not washing and rinse but it can spin Cause 1 Agitator Repair Kit If the washer won’t agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit....
Chosen Solution I been trying to turn my phone on I tried everything I could but it seems like it won’t turn on can you please help me my phone means everything to me the power button is broke is there any other way to turn it on right now I would do anything to turn it on Hold the power down button while plugging the phone in to the wall outlet....
Chosen Solution my phone is restarting every 30 sec or so, i need to factory reset it to see if that would help. but before i do that i need to get all the pictures off the device. any suggestions? sadly 30 sec isn’t enough to download all the pictures :/ Does the phone get into the main menu at least? Can you boot into safe mode? Hold the power button until the power options appear, then hold the “power off” icon for a few seconds until a reboot into safe mode option appears....
Chosen Solution Yesterday my laptop said it needed to be restarted and would do so by its self while i was using it. Since then it hasn’t worked. When I turn it on I see the hp sign and the loading symbol underneath. It then goes to a black screen and recently it has showen me the log in page but hasn’t stayed around long enough to allow me to log in....
Chosen Solution These are the two screens that I keep seeing after I try to turn my 15” Late 2011 MacBook Pro on. It was shut down prior to this as I always let my computer die and I don’t keep it on the charger. I’d say the last time that I was able to use my computer, normally, was about last week. There was no sign of it being weird or acting out during that time....
Chosen Solution I used Lenovo Desktop H530S recently changes motherboards from Lenovo customer services engineer but once replace after getting error Invalid Serial number Can you please help me Thank You. It needs to have the correct serial # from the system board . Lenovo customer services engineer needs to reprogram system board.
Chosen Solution I’m trying to diagnosis and repair my sister’s TV. I’ve already read about the common issue with this and other LG TVs - bad LED strips, but don’t want to make any investments just yet. A quick visual inspection of the power board and main board didn’t turn up bulging or leaking, and I stumbled on a few (more like a lot) of posts about the LEDs. After taking it apart and checking all of the LEDs individually, I came across a single bad one, which in the cases that I’ve seen is enough to cause the issue of turning on and then off....
Chosen Solution Hello. I have taken the logic board out completely and nothing that can be unplugged is connected. A lot of the capacitors are shorted to ground. Before I buy a replacement I thought I would check if there are any common problems I can check for and try to fix. This logic board has an ATI chip. Cant see anything obvious. Chris This system is very old! Parts (assembles) are just not hard to find that are even still good....
Chosen Solution I have a Logitech Quick Cam V-UJ16 Pro 4000 but no associated software to make it work. Logitech support has nothing. Does anyone have any software for this model of Cam? Hi @gpospish , Did you try this to see if it worked OK?
Chosen Solution Please help, I phone 5c had water damage…. New Antenna installed, new sim card, new battery…. Still no signal, sometimes go to one bar of signal so I know it can work…. Taken it to repair but no help and just charge a a lot of money :( There are more than one antenna.. Maybe you have to open it again and look for some oxidised parts
Chosen Solution My volume is low on my earpiece receiver no matter how high I set the volume. I replaced the earpiece receiver and it still does exactly the same thing! Any ideas on what to check next? Thx Check the black filter that is at the earpiece speaker usually this gets clogged up with either dust or metal debris as the earpiece speaker is magnetised. When it is quiet it almost is always that....
Chosen Solution So recently I wanted to get some “professional” writing done so I took put my MacBook Air. I pressed the power button but nothing happened so I assumed that it just had to be charged. I plugged the MagSafe connector in and then It flashes Green to Orange to Green and then stays on green. At the time I did not notice that so I just continued to boot up....
Chosen Solution OK, So I took my MacBook to get a thermal paste replacement, and when I got it back the MagSafe light was off. My battery was bad so I didn’t have any way to notice something else was off. I just swapped the battery for a new one and noticed it would not charge although it was actually recognized. All my charger would do was to hold the charge at the same level....
