Chosen Solution I have the same issue. My lg TV (plasma) has sound but d picture was so dim. Solution pls eddyolu going by your scant descriptions of what is going on with your TV it sounds like your Z-Sus board has failed. The Z-sus board is responsible for the brightness level of the picture. If it’ has failed you will get a picture but it is extremely dark.
Chosen Solution Hello there! My Samsung J36V phone will not turn on at all. It was working fine this morning (about 7:30 AM) but then later I tried to turn it on and got no response. Held it down, still no vibration or signal that it’s dead (which I doubt because I left it on charge overnight) I’ve left it alone since then and it still isn’t working. It has not come in contact with any water or other substance....
Chosen Solution hi, recently i replaced the lcd screen on my iphone 5s and now it only shows green and white bars but no ios features at all! nevertheless they change a bit while i am in lock screen for example. (i assume that i am there.) it happened after i had to reopen the phone because of some leftover white bars after reassembly with the new display (ios showed up in between)....
Chosen Solution Hi, I have a frontload LG washer wm3360hvca. I’ve had it for about 7 years. Since purchased I’ve replaced the drain pump twice. That being said I now have a new problem. Yesterday the front door blasted open during the cycle and poured water absolutely everywhere. I cleaned it up and checked the door lock. It appears to be fine. The problem now is that during every spin cycle it leaks A LOT of water out of the white drain next to the water inlets....
Chosen Solution My LG 50LN5200-UB has power to it but won’t turn on. The LED light in the front is on (but dim). Before it would turn on but shut itself off. When that happened I would just unplug the power cord and wait 10 seconds before plugging it back in and it was fine. As of today it won’t turn on at all. I don’t understand why it’s not turning on when there’s obviously power going into the TV....
Chosen Solution hi After a liquid spill i carefully cleaned the inside of my macbook pro 13" retina with isopropyl alcohol. Now the flashing folder with the question mark keeps on getting in my way. I tried Pram (or something like that) reset, i tried recovery mode, but there they couldn’t find my ssd, I tried bootable usb… nothing so far i didn’t submerge my logic board or ssd so there are or could still be some ice tea spots....
Chosen Solution I need a replacement DVD tray drive band for a Sony DVD/VHS combo player. 1.5” (folded) x 1/16” Dia Unable to locate on any sites . . . For 2 sites that I will advise you to check out,. http://www.gbaudio.co.uk/data/dvddb.htm https://www.aliexpress.com If you can’t find a proper one by yourself, try to contact the sellers of that kind. Hope my answer comes in handy for you. Good luck!
Chosen Solution Problem. MB Air suddenly says WIF: NO HARDWARE INSTALLED. Can’t turn it on in System Prefs. The hardware doesn’t show up in Sys Profile. OSX Mojave. Opened the computer and the cables seem solid. Bluetooth works fine though. They’re on the same card so if wifi was a hardware problem wouldn’t Bluetooth fail too? Hope to find easy solution before buying new card! Thanks. Update (08/17/2022) Sorry. Should’ve also said I tried resetting SMC and PRAM but nothing helped....
Chosen Solution Hi, Need your help over here! Earlier, my MAC was not starting after SMC or NVRAM reset. The charger light was Green. Nothing was happening on SMC reset. Battery Status was Service Required. But due to COVID-19 lockdown in India, I can’t take it to an Apple Store for another 10 days. I left the Mac as it is. Today, after 6 days, randomly, I plugged it in and the charger light was Amber....
Chosen Solution Hello, Im trying too fix a mac pro 2008 3,1 3.0 8core. When its starts up it gives a kernel panic. My first thoughts where that it had a bad hdd. I plugged it in another mac as a slave disk en got all sort of damage reports when using disk utility. Internet recovery mode Also when i tried internet recovery it wil not instal en fresh osx. I got out the old hdd and plugged a new (old) one in....
Chosen Solution Hello, I asked iFixit so very long time ago about MacBook Pro 13" Unibody Mid 2009 maximum upgrade. He confirmed it can upgrade to 16GB. (I sad about max RAM can up to 8 GB (2x4 GB) Today I will upgrade my Mac to 16GB but its 3 beeps. I remove 1 slot of 8 GB, its so 3 beep won’t boot. I put old 2 RAM (2x4GB). it can normal boot....
Chosen Solution Hi, A friend gave me a Macbook Pro that did not work anymore, so I decided to see the source of the problem, to do a SMC reset, but nothing worked. So I thought you might be able to help me. I will try to be as clear as possible. The Macbook Pro 13 inch year mid-2010 is in very good condition, the battery seems to work and when I connect the charger, it shows a green signal continuously, without blinking....
Chosen Solution After my original HDD started to fail, I upgraded to new battery, 2x8 (16GB) of RAM, and dual 1TB SSD’s. I tried to use a bootable USB installer to install a fresh copy of macOS and when I power up I got no chime, would not boot up in any mode, just a blank screen but it was running and it seemed to read the USB because it lit up while it was being read....
Chosen Solution MacBook Pro 13 2011 This morning I I tried to turn on my MacBook Pro and it wouldn’t turn on at all. I connected my charger to it and neither the green light or orange light would come on. I thought My charger had gone bad so I grabbed my other charger from my other MacBook and it still wouldn’t charge or light up green/orange. I took it to apple to get it checked out and all they were able to do is simple troubleshoot like resetting SMC....
Chosen Solution Hi, My macbook 13’’ mid 2010 was having problems charging, it wouldnt charge past 10%. Being an old laptop I assumed it was the battery and I changed it, but the problem persisted. I noticed the power jack was pretty busted so I ordered a new one, opened the notebook and exchanged the piece. It all seemed fine, the charging light was back to normal, but now the computer wont turn on....
Chosen Solution So i just bought an logitech Driving force Shifter, and want to make a standalone version, cause i dont have the wheel for it, and i figured they use SUBD9 Connector, well only one, and i hoped to get some help from anyone, that could help me make this happen to become a usb connector? i have an arduino i could use to convert the SUBD to the usb through arduino i watched this guy here but still yet i didnt get much out of it....
Chosen Solution Maytag Bravos XL washer, model no. MVWB835DW2, will not complete a wash cycle. Tub fills, wash starts, then after a few minutes, the power light starts blinking and the tub starts draining. Once the tub is empty, the washer shuts off (no lights or error codes). I have already tried resetting it with the same results. From what you are describing, it sounds like you have a shorted keypad in the console....
Chosen Solution I have an Olympus SP-720 UZ camera. When I turn it on, I get a message on my screen that reads “write protect”. Can someone give me an idea what is going on. It goes away when I take the SD card out, but there isn’t enough memory in my camera to take pictures without it. @jluther ““write protect” refers to SD card. There is a Lock switch on the left side of the SD card....
Chosen Solution hello I replace my broken digitizer but now the battery won’t charge and the home button won’t work either. I tried another digitizer and its the same. Which connector on the motherboard controls these together? I probably bent or broke pins? The charging and home button worked before you replaced the screen? I’ll get the connector pics for you here shortly.
Chosen Solution TV does not power on now and no standby light. It’s a 2007 27inch tv. Any suggestion? Frankly I’m poor and can’t afford a new one. Hi @edubinthehills , If it is smoking, DISCONNECT the power from the TV as it is a potential fire hazard. There is obviously a problem, possibly with the power board although this may not be entirely correct. Was any liquid spilled onto the TV by any chance?...
