Posts

Chosen Solution Model is Toshiba Satellite S55t-B233. The laptop turns on and stays on, but the LCD never turns on (and stays on) and it doesn’t put display out to an external monitor via a working HDMI cable. I have tried replacing with working RAM. I have already tried 2 different motherboards and unplugging everything else, but there isn’t any change. I did some testing with a multimeter just to be sure and enough power is getting to the motherboard....

Chosen Solution I have an LG 50NANO79SNA tv. It worked just fine until I allowed it to apply the latest WebOS update… I remembered that these took a while, so I started the procedure then went to bed. When I checked on it in the morning I had no picture but had sound, and the TV did not respond to the remote to power it back off again. I unplugged it, plugged it back in and now have no picture at all....

Chosen Solution I have similar problem. I opened the back of the TV and looked at the power board. It looks like one of the IC chip is burned. See the chip with the red circle in the picture. Any idea what the chip is and where I can find a replacement for it? Thanks Ted @ted944 that looks like a LD7913JGM6 Current Mode Control PWM

Chosen Solution Hello, I have a 30 Gb iPod Video 5th Gen. I get a low amount of static through the headphones when the unit is on. I am using relatively high quality headphones (RBH EP3). I have tried other headphones and the result is the same. I was upgrading the memory of my wife’s iPod to 780 Gb using the iFlash Quad SD adapter. The unit is in outstanding shape as she didn’t use it much....

Chosen Solution Hi all, After a restart, my Mac Pro 5,1 boots up without video output, I can access the files and content via a networked computer, so I can confirm booting up is not an issue. My Mac Pro: Mac Pro 5,1 (Mid 2012)3.2GHz Quad-Core Intel Xeon3 x 16GB 1066Mhz DDR3 ECC (total: 48GB)1 x 1TB SATA SSD / 2 x 1TB SATA HDD / 1 x 4TB SATA HDDUsing a 27" Apple LED Cinema Display I was running on Mojave 10....

Chosen Solution Some dust got inside the track pad of my new MacBook Pro 13" Model A1278 (bought brand new in May,2014). I followed a tutorial video of how to clean the track pad, which involved unscrewing/disconnecting the battery to get access to the track pad, disconnected the track pad carefully, cleaned it and replaced it, then replaced the battery. The MacBook was not connected to the MagSafe adaptor while doing this, the power was also turned off....

Chosen Solution Hi, I just bought this MacBook used and when I connect the MagSafe to the port, it tilts downward. I can still charge the computer if I leave the charger tilted or it’ll charge when flushed to the port but only for a few minutes. I’m trying to think of an easy way of fixing this issue short of replacing the board because they’re hard to come by. If I need to replace the board I will, I also want to be sure that will fix the issue....

Chosen Solution i need to know this, i have iMac Intel 21.5" EMC 2544 and its logic board have ssd slot space but no have a connector if i found that connecter and to solder the right place can i install ssd like iMac dmc 2546? i explain with pic sry for my eng :D Officially, Apple does not consider the hard drive and/or SSD module, or the processor in any of the “Late 2012,” “Early 2013,” “Late 2013” or “Mid-2014” Tapered Edge Aluminum iMac models to be upgradeable....

Chosen Solution If you replace the motherboard will you still keep your messages? You need to back your phone up using iTunes or iCloud to keep all your text messages. It will be like the other user left it. So no. You will ned to do a iTunes backup.

Chosen Solution Replaced the optical disc drive, downloaded the Blue Ray program, movies work fine. Xbox One games won’t load and aren’t recognized as Xbox One games. Do I need to take the daughter board from the old drive and replace the one that came with the new drive for Xbox one games to be recognized? Turns out that the daughter board that is inside the optical drive is paired with the motherboard of the game console....

Chosen Solution My eStation Zeen’s touch screen has a frozen display and won’t respond to touch or any button inputs. If the HP eStation Zeen’s display is unresponsive you may have to restart the device. To do so, hold the power button for about 10 seconds until the screen turns off. Release the button then push the power button again to turn the eStation Zeen back on. For more information about this issue try checking out the troubleshooting page....

Chosen Solution my i pod was fine until it froze so i turned it off for a second then when i tried to turn it back on it would not work. It was fully charge and did not have the littles crack. But the thing is that siri still worked but my screen was black as night. My i pod was not even that old i have had it since last christmas....

Chosen Solution My IPad Pro 12.9” lightening charging port is not working. The port is very loose and sloppy. Any ideas? hello Winston, just one: change it if in doubt. Cost circa 4 $ + soldering. If you can do it yourself cost of work is 0$ If not, cost of work is circa 150$ + 75-100$ for screen de-assy insurance (quite fashionable fee recently in the US). Not a cheap thing....

Chosen Solution I’ve recently been using my iPad to watch alot movies, and something terrible occured last night. I was watching some movies one my iPad air 2 (bought last year), while being charged, with my headphones plugged in. Then all of a sudden the screen suddenly went black. None of the buttons on the iPad would work, and I’ve tried all the solutions online, but they were all useless. I have tried pressing the home button and power button for over a minute, but the apple logo would not appear....

Chosen Solution when i go to use keyboard it says its crashing, then wants me to remove google keyboard and reinstall another type of keyboard. You could try factory restting your phone, or check to make sure your phone is updated to the latest version of android that your device supports.

Chosen Solution My laptop is not turning on Its only showing its charging Hi @otakunoweeb Try a power refresh in case it is a corrupted BIOS that is preventing the laptop from starting. Disconnect the charger if connected and then remove the battery from the laptop.Press and hold the laptop’s Power On button for a full 30 seconds and then release it. (Doing this will cause the BIOS to revert back to its factory default settings, hopefully restoring any corrupted settings)Reinsert the battery into the laptop, reconnect the charger and try turning the laptop on....

Chosen Solution i’ve spilled water on my hp laptop about 2 weeks ago, i dried it and powered it up again and again but it keeps shutting down after 5minutes without any warning, i took it to a repair shop and they said that all the hardware is working fine and they don’t know what’s wrong with it.since it’s the battery won’t charge anymore i thought it was a power related issue and replaced the power socket it didn’t fix the problem but i can use it now for about 2 hours before suddenly shutting down...

Chosen Solution I am just trying to save my videos, pics, and contacts before buying a new phone. Does anyone know if that’s possible somehow internally? This model doesn’t have a removable battery (not suggested to remove it). I just want to save the thousands of pics and videos I have before dumping it. I’ve tried pushing aggressively, shot canned air in it, etc…nothing. Hi There, You might have damaged the charging port....

Chosen Solution How can I fix the problem that my phone is having? It can show that it’s charging but it cannot be turned on. I have no idea what is wrong with it. Can i get any help please?? Frances Zack those are always tough situations since you never exactly know what has failed. I would start troubleshooting as shown on the flowchart for your phone model. Let us know what you get with this....

Chosen Solution Phones froze on startup screen! @donnienewton77 pull the battery and wait some time, then reinsert and double check LG K30 Battery Replacement Hi @donnienewton77 When your phone is stuck at the logo screen, it is usually a sign that the phone is having problems loading the software from the built-in flash memory. If a simple restart does not fix your issue, you may need to wipe the device. Here are some instructions on how to complete that process (NOTE: this will erase all personal data from the phone)....