Chosen Solution I accidentally inserted the sd card into the small gap between the sd card slot and the battery. Now the LCD doesn’t light up but is still touch sensitive. Besides that, the camera is still fully functional. Can I fix this myself or will I have to send it to gopro? Also does warranty cover this? Contact costomer support. They’ll help you fix it or fix it for you....
Chosen Solution Hi i’ve replaced the lcd of my Iphone 6 everything went great and once i put in the ribbon cable and tried to start it there were no signs of life. So i did the usual check, i tried another lcd, same thing. I connected the phone to the computer and it recognized the iphone but there is no vibration, no signs of life from the phone itself. I can feel the cpu getting hot but nothing else....
Chosen Solution Hi, my TV have randomly started pulsating some lines on the objects. I’ve tried to reset the tv to factory settings and also upgraded/downgraded the fw and problem still issue. Clip on the issue. https://www.youtube.com/watch?v=2gs6PVba… Jakob Vesterberg this could be an issue with the main board. Try different video input sources (HDMI, Composite, Coax etc.) and see if it remains. If so, I would consider replacing the main board....
Chosen Solution Hello Everyone, I came across a LG Leon H342f/H340 with a missing proximity sensor- apparently. Does anyone have a picture of this part of any link related to it? I have not found any reference online yet. Many thanks. Okay, I found a picture of a board with it on. Not sure whether is possible to get a replacement?
Chosen Solution Where is the location of the air idle control valve in the engine compartment @ponpon you did not tell us the engine size, so here are the locations for the 2.5L and the 3.2L
Chosen Solution If I take the logic board from an AT&T iPhone 6s and replace it with the logic board of a T-Mobile iPhone 6s what will happen? In terms of coverage, basically will the phone work properly? yes it will work aslong as the t-mobile board is fully working
Chosen Solution Hi, my z906 was playing at low stable volume today and it just randomly cut out power and isn’t powering on, there wasn’t any smell whatsoeverI’m no expert in repair but feel pretty handy so want to try if i can repair my trusty Logitech Z906 here first before doing anything.I cracked it open and tried to look for any marks of something blowing and found the following (see pictures)...
Chosen Solution The surge protector that I plug my desktop computer into recently bit the dust (power wasn’t going to the computer properly and the plugs were emitting a smell). I want to replace it with something better, ideally with a battery back up if it’s not too expensive, but my searching around for recommended items seems to dead-end. Does anyone have a suggestion about the surge protectors they rely on?...
Chosen Solution OK, the phone is sitting on the phone disabled screen. Tried to put into recovery but it acts like the home button isn’t even being pressed. I know the home button works. Dr,fone software says it can fix it. Can it, or if there is other software out there that actually works, what is it? Thanks You can use 3UTools but you’ll need to restore the iPhone as it’s already disabled....
Chosen Solution Macbook Air Mid 2013 The computer randomly freezes (sometimes 3 min, sometimes 1h) but only when the battery is installed. No problems when battery is removed. I had assumed my battery was not good and purchased a new one. To my surprise the issues persists. I already reinstalled the OS and ran Apple Hardware Diagnostics. I also tried different types of resets. I noticed that when the battery is installed the computer heats up right when I start it (70 Celsius) and the cools down....
Chosen Solution My Mid 2014 13” MacBook Pro A1502 is getting really hot when under normal use. You need to put a book under it to keep it from burning you. I have plans to open it up and clean out any dust inside of it and I’m thinking it probably has something to do with thermal paste as it has never been replaced or opened in 6 years. I wanted to get some answers on whether I should clean it out and if I need to replace the thermal paste....
Chosen Solution My MacBook suddenly shut down with about 17% battery left. We tried the shift, control, option, power key buttons and held them down simultaneously for 10 seconds. Then plugged in the power cord and hit the power key. The laptop turned back on. We entered our password to log in and it was loading at the bottom. Then it suddenly shut down again. Now we cannot get it to turn back on at all....
Chosen Solution Hello i am having a problem on my Huawei p30 lite.The phones motherborad drains out the baterry and dont let it charge I owe 2 same phones and i dissasembeld both of them.I tried to connect them with all other parts and … I determined that both motherboards work perfeclty fine but that one drains out the battery,while it is connected to the charger i recognizes the charger but it is not charging....
Chosen Solution The tire pressure light comes on even though there is air in tire. Then sometimes it will go off showing air in that tire. Later it will come back on showing no air when there is air. Most likely you have a tire pressure sensor going bad. Time for a trip to the favorite local tire dealership. Please pick someone with sense (not Walmart or pep boys).
Chosen Solution After the socket blew Naana Apaw, There are a few things you should try: Test with another cable and another charger, in another socket (outlet)Check with another device (using Lightning) to verify the charger/cable/outlet is OKCheck with a DMM (digital multimeter) the output is 5V from the charger If the phone doesn’t respond with a new cable/charger/outlet, but other Lightning devices responds to the same, you’ll have to (at least)open the device to check for damage on the logic board....
Chosen Solution My blender food jug is not spinning but the engine is spinning well Hi Ahmed, My son has an old VitaMix blender that was having a similar problem; I finally diagnosed it as the screws on the bottom of the housing had loosened over time allowing the motor to drop slightly to the point where it wasn’t high enough to engage the splines on the container and spin the chopping blades....
Chosen Solution my hansets mother board got damaged how could it be replaced and what will it cost to me i dont have a service sentre in my city Hi i have a honor holly display broken only and everything is ok r u interested to buy ?
Chosen Solution my iphone 6 fell in water and won’t turn on Hi The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. The corrosion starts immediately and is ongoing until it is completely cleaned away First do not try to charge or to turn on your phone and then remove the battery as soon as possible from the phone to minimize any further damage....
Chosen Solution I reset my iPhone 5s every so often because my memory slows it down. But now I am stuck! It is acting like a factory reset. I’ve tried resetting (power and home button) several times and it just loads the sim unlock passcode screen, then I unlock the iPhone, then the ‘Hello’ in multiple languages screen (lock screen) and the most I can do is connect to WiFi. But my WiFi does not work....
Chosen Solution I got the phone from someone else and basically, the problem is that when I plug this phone into the charger it turns on to a flickering apple logo that goes up and down vertically. It does there peridodically and there is a little smudge on the bottom of the screen. I was told it was an LCD issue but I wonder if it has something to do with the logic board....
