Chosen Solution Can you tell me how to remove my glass because my iphone is broken but it still works Just set up a repair with Apple. They will fix the glass for a reasonable price. I am not sure if you screen is cracked and you can still see the picture and only want to replace the glass or if the LCD or digitizer is broken and you have no picture or touch funtion....
Chosen Solution Picture problem is slowly getting worse over the past week. First a thin horizontal black line appeared completely across screen, about third way down from top. Then a few days later a thin horizontal green line appeared completely across the screen about halfway down. Then the entire screen now goes back & forth from normal to slightly blurry & jittery, then back to normal. This is repetitive and takes only a few seconds each time....
Chosen Solution It was fine all yesterday and then it randomly stopped working. I haven’t dropped it, or spilt water on it or anything. It just stoppped working out of the blue , but the power button works which is weird. what should I do? Reset it? Please help!!!! Try a SMC reset: turn the Mac off and with magsafe plugged in press shift+ctrl+alt+power all together. Charging led should go from amber to green for few seconds then return amber....
Chosen Solution My family was visiting me and my kid brother asked me to play with the phone so i left it with him for the day. After he gave it back to me i saw a trail of ink around my bottom microphone and i immediately knew that he broke a pen in it. I haven’t tried any method yet as the hole is too small and i’m afraid i might break the microphone....
Chosen Solution When I plug my charger in the light of caps lock flashes and the light showing it’s charging is also on but pressing the power does not result in my laptop switching on. Does anyone have a clue what’s the problem and how to sort it out? Try the following. Remove the battery and press the power button for 30 secondsWith the battery removed, plug in the charging cable and check if you can boot If that doesn’t work, your battery is dead....
Chosen Solution Today I went to use my mac book air and it didn’t turn on. I thought it might be dead and I connected it to the charger. The charger orange light turned on fine but the laptop didn’t respond at all. No sounds no nothing. I tired the basic tricks and the orange light turned green for a few seconds and that’s it. The screen hasn’t lit up once....
Chosen Solution Last night I was watching youtube and slept while it is charging on the floor. When I tried to turn it on, it does not work even though the charger was connected last night. I thought there’s no battery in my mac, so I tried to charge it which failed again. there is no problem with the charger cause it worked on my 2nd mac. What’s wrong with my mac?...
Chosen Solution I was using my MacBook Pro smoothly last night. Then after waking up this morning all of a sudden the keyboard and trackpad stopped working. I’ve searched the internet for solution and people are suggesting to SMC and PRAM reset but my built-in and external keyboards are not working. I have brought my system to support and they are suggesting to have my keyboard and trackpad need to be replaced but I think this does not resolve the USB port issue....
Chosen Solution hi, My iMac screen recently started displaying 19 vertical red, green,blue lines . But they are invisible/ disappears when something white displays on screen darker the display is sharper the colour of the lines are. line are static even resolution changes. I tried removing and reseating the LCD cable that connects logic board. Can anyone advice me to try something out to fix. See below images too.. with darker background (notice the lines)...
Chosen Solution Which lcd controller board are compatible with the lcd in the x220? Im trying to turn the touch lcd from my X220 tablet laptop into a portable external monitor, for that I need to hook the lcd up to a LCD controller board, which are compatible with the tablet version of the Lenovo X220 Hi,What’s your LCD screen number?I think you could use this controller board: http://www.ebay.com/itm/LA-MV29-P-HDMI-U…
Chosen Solution On 3/20/17 I received my LCD screen and front panel assembly. I successfully replaced and fixed the iPhone5 but on 3/30/17 the screen slowly went black, from bottom to top. You can see a small bit at the very top, ~1/2mm, but other than that no screen. You can see in the pictures when it was 1/2 bad but now it is the whole screen. It still works BTW, if you know the passcode you can simulate the pattern and unlock the phone and use siri to call so I’m supposing that means the digitizer is fine… Thoughts anyone?...
Chosen Solution 2016 samsung washer makes loud noise while in rinse, spin cycle..what can this be? and what i can do to fix this… Check the drive belt and maybe replace it https://www.amazon.com/Samsung-DC66-1017… Also if the noise is only when water is on it maybe the valve getting stuck from calcium depost and soaking it in CLR should fix this. Also run some CLR and water only and stop it mid cycle before it drains to clean these deposits out....
Chosen Solution Hello, Have the problem that my Mac Mini mid 2010 no longer starts. When I turn it on, the LED turns on and the fan runs, but the screen remains black. After a short time, the Mac Mini will start beeping 3x short 3x long 3x short. But what does that mean? On the Apple side, I only find 3x long 3x short 3x long which indicates an EFI update error, but mine beeps the other way round....
Chosen Solution Hi, I have an old Mac Pro Early 2008 with a fried motherboard. Im trying to use its fans for my Windows pc. they have a 4 pin connector do does my motherboard but the wont turn on. The fans Model number is Delta AFB1212HHE and they are 12v 0.75A and my motherboard is a Gigabyte GA-z97x-ud3h-bk. Any way to make them work? Thanks @yakoenicol it is usually the outside pins that are the + and - connection....
Chosen Solution Today I got a very small amount of milk on my Mac, thought nothing of it and wiped it off and when I got home I put it on charge, I now realise there may have been some liquid in the usb c port as it now won’t charge, any ideas as to how I could fix this from home? This is tricky! Is the damage limited to the port board MacBook Air 13" (Late 2018-Late 2020) USB-C Board or did the damage jump to the logic board....
Chosen Solution I spilled some water onto the keyboard of my 2016 11” MacBook Air. I had let it dry but now it only turns on when the laptop is plugged in. If the cord is taken out, it immediately shuts off. Also, when I plug the charging cable into the side of the computer it automatically turns on without pressing the power. It doesn’t turn on from batter power at all....
Chosen Solution Hi, After dropping my MacBook, the screen doesn’t work, and the computer won’t work with the lid open. If I turn it on and immediately close the lid, I can use it with an external monitor. It works perfectly with an external monitor. But if I open the lid, the monitor goes black. I have to force shutdown by holding down the power button, then turn it on again, quickly close the lid, and then it works again with the monitor....
Chosen Solution Hi all, I have a macbook pro A1398 that will not charge, I have replaced the battery, charging jack and magsafe charger, still will not charge, I have checked power status which shows no power adapter connected or charging, the other ports next to the charging jack work. OK, we need to check the DC-In Board Review this guide to check the connection and if need be replace the connector MacBook Pro 15" Retina Display Late 2013 MagSafe DC-In Board Replacement Also make sure you MagSafe charger is in good shape....
Chosen Solution Hi I want to buy an macbook 13 but I’ve one requirement. The device must have 3 antennas. What are the devices that have 3 antennas? I prefer the 13 but if possible tell me the list of devices that have 3 antenas. Thanks Apple doesn’t offer much details on there systems beyond stating the 802.11ac spec. The rub here is there are two rollouts of 802.11ac - Phase1 (wider bands) and Phase2 (MIMO & MU-MIMO)....
Chosen Solution I have this MBA which boots to a screen with vertical stripes. I can access the machine via external screen. Would it be safe to conclude that I need to “ just” replace the screen and be OK after that? Also, would it be safe to plug in a screen from a A1466, EMC 2925, 13” MBA to see if that will work? Yeah you can plug in that screen, wont fit as it’s a 13” but good enough for testing....
