Chosen Solution I’m having a problem with my MacMini 2012. I push the power button and nothing happens, no chime. Previously, it would freeze maybe once a month, and I would just hold down the power button to reboot. It happened again last weekend, but now nothing…. I took out both memory modules and it still wouldn’t boot. I also disassembled the unit––there doesn’t seem to be any visual damage to the logic board....
Chosen Solution Hi, when I plug my Mac mini in the Mac turns on but after a few minutes (1, 2) it turns of randomly and when I hit the power button the Mac will not turn on so when I cycle the power (unplug and plug in again) the Mac wil sometimes (2 out of 8 times) but for like 5 seconds max whats wrong with the computer can someone help?...
Chosen Solution After installing a replacement battery (purchased from iFixit), my mid 2010 MacBook Pro consistently shuts down (without warning, like unplugging a desktop computer from the wall) when the charge level gets to about 30%. It also doesn’t seem to hold a charge any longer than the 7+ year old original part. Are there software settings that need to be reset after installing a new battery, or is this likely a faulty replacement part that I should get exchanged?...
Chosen Solution Hi, I have a 2019 macbook pro and it does not start. When you press the power button, the macbook stays in the apple logo with the fans at maximum speed. I have tried to enter DFU mode but there is no way. any idea what could happen? If you spilled something on it previously, that could be a factor, and it could also be a bad battery, or a cpu/gpu issue....
Chosen Solution About a month ago my 2019 MacBook Pro was stuck on a blank screen. It’s like the laptop was still working, but the screen stopped working. There would be a sound when I plugged the charger in, I could hear the fans working, I could even charge my phone. But the screen stayed black. Eventually I found a fix online. I reset something by holding keys down after pressing the power button and it started working again....
Chosen Solution When on battery the laptop runs slow (no matter which app ur working on) but it works fine once the charger is connected. Apple does not support repairs for this old laptop now. I checked with a local repair shop and they said its the keyboard which is a problem here. According to them, the battery is good. Im still not convinced that the keyboard could be a problem here....
Chosen Solution Hi @tiff07 , Here’s a link to the ifixit Digiland 10.1’’ DL1016 Motherboard Replacement guide. This will help you to open the tablet to gain access to the micro USB charge port connector It is an smd (surface mounted device) type component so you will need smd soldering tools and skills to do the replacement. There are plenty of videos on YouTube that show how to remove and replace smd USB connectors Micro USB connectors (or any other USB connectors for that matter) are not all the same....
Chosen Solution I’m asking about repair for my Microtek ScanMaker 8700. It was a pretty great scanner, but lately it won’t cycle on. It has had a sketchy history of starting up, but now it blinks and makes some occasional sounds, but the three lights in front never go full green and it fails to be recognized on the computer. Before I toss it, is there any person who you can recommend to take a look at It?...
Chosen Solution Whenever I turn my monitor on, the LED indicator light comes on, but nothing is displayed on the screen. Dustin Germain, no reason to replace the monitor. Keep it out of the landfill by replacing the caps on the power board. This is a common failure with the LCD monitors. If there is no display on the monitor, then you need to modify your monitor’s settings. The problem is either caused by the connections between your computer and the monitor or there is something wrong with your screen....
Chosen Solution Can the motor post cover be replaced? Hi, Not quite sure what you are referring to. Post some close up pictures of what you mean. Here’s how Adding images to an existing question Are you referring to the stem that holds the blades? If it is the blade stem then here’s a link to a supplier of the part. Be aware of the warning given with the part: “If you are replacing parts for older Cuisinart machines, you may have had discs that each had their own stems....
Chosen Solution I have a Late 2008 Aluminum - MB466LL/A - MacBook5,1 - A1278. I have done all the steps Apple has told me to do which involves resetting things. I have tried using a new battery and new charger and still nothing. One of many problems are the battery life indicator button does not work or show any light at all when pressed. My charger shows it’s charging (orange light) but in a couple of minutes it turns green....
Chosen Solution I changed the iphone 7 charging module, no sound or haptics, no charging. but if i put another module it works and charges but it is in the air, not twisted, so i think the contact is not damaged but probably the wire of the screwed module breaks too much, i tried everything, how to fix it? It sounds like a bad or damaged charging port, try a new one....
Chosen Solution If I connect the AC power to the system it will show full power (fan works - hard drive light is on and giving sound for reading the HDD attached to it) The problem is it doesn’t complete the process of booting as the fan keeps running, but the light for hard drive is always on (which should turn off in 10 sec before boot) black screen, battery won’t charge....
Chosen Solution I switched off my iPhone and when I turned It back on it said iPhone disabled connect to iTunes , what should I do ?,??? Reset, hold both home button and power button at the same time for about 10 seconds until the iPhone begins to restart. If still problem after this reset you will need to Restore the iPhone with iTunes on computer. If you cant get your iphone’s password back and if you dont mind factory resetting it and getting rid of all your stored data than go to another device that has find my iphone, you want to got to your iphone and press “Reset iphone” after that your iphone will be factory restored and you will hve to save your last backup and just install all of the things you had previously on it...
Chosen Solution My laptop yoga c740 is suddenly training of i have change the thermal pest but ist fixed so if any of you have answer I well be thankful Hello this is Maxed Out IT Explain what is going on it is hard to read your post Good afternoon from the down under, If it is going to sleep and then turning on after 10-20 minutes, let’s run through a few things How often does this happen after you turn it on and start using itUnder what workload does this occur if it’s specific....
Chosen Solution So i recently have my newly given tablet by my collage. But when i try to update the system it suddenly go into recovery mode. And i choose the restart the phone. And after that the tablet won’t turn on. I have tried the method to use the reset button but it only turn on into recovery mode. Can someone help me how to recover my phone to its usual setting?...
Chosen Solution My LG 50 inch flat screen TV has a black screen but, it still has sound. You can turn the room lights off and put a flash light to the screen and see a picture. A so called TV repair man told me to get a power board/control board kit, after charging me a hefty house call fee. I installed all of the boards that came with the kit....
Chosen Solution Hi, I have a micromax canvas xpress 2 E313 handset. My handset is 7 month old.Actual problem is now my mobile is canvas xpress 2 and is not switching on, got stop on screen logo.Plz help me Every email accounts invalid in micromax canvas E451
Chosen Solution I plug it with the battery and still it isn’t turning on. Try by holding both volume buttons and the power button untill the screen light’s up . I hope that this will fix ypur problem
Chosen Solution My phone was working fine this morning but when I plugged it in to charge (It was around 10~15% battery) It would detect the USB cable but it wouldn’t charge. It would vibrate and the “low battery” notification would disappear but it won’t charge. So I turned it off and left it plugged in to charge. Things I’ve done: [Power button + volume up] vibrates 3 times red light (turned blue the first few times) shows SONY XPERIA white screen shows battery screen + charging sign on top of the battery thing but it doesn’t charge, no battery percentage shown [Yellow button + removed SIM card and memory card] red light shows SONY XPERIA white screen shows battery screen, no charging sign but battery percentage is shown (0%), not charging no light while plugged in now....
