Chosen Solution My canon had been working just fine and out of nowhere it started turning off on its own. The screen goes black after a couple of photos for no reason. Every time this happens I take the fully charged battery off and put on my 2nd fully charged battery. Then it turns on again and allows me to use it again for some photos and ends up turning back off....
Chosen Solution Hi first question? Is dual shock3 control use Bluetooth or wifi for connection with the console? My controller is working fine when it is a plug with a USB cable. I see that is fully charged but the moment when I plug off it the 4 light is blinking and I cannot control anything. Same happening with both controllers I have. Change the battery, try with other controllers. It seems that something gone wrong with the console… I have a super slim console… What part can go wrong and how to be sure before I purchase parts?...
Chosen Solution Replaced the screen in my IPhone XS and reattached everything as appropriate. The speaker, speaker phone and back camera work but the front camera does not. There is also a line on the very bottom of the screen-maybe 1/8th of an inch. Any ideas? Sounds like the camera didnt get attached right. About the little line, you may have applied pressure while putting on the screen. Please send pictures if you can of the camera and line and i can try to answer your problem...
Chosen Solution I was in berlin for a few days and i left my headset in my room row i have come back and it wont turn on again. Also the charging light does not show when i put it on the charger. I put a shirt over the lenses while in germany and it was not charged I think you puttinga shirt over the lenses, thus leaving thedisplays on, may have actually caused some components to overheat....
Chosen Solution Hello! i was going to replace the homebutton, so i switched off the phone, repaired it. then i started connecting screen and when i plugged one cable in, it started smoking. i was scared so i unpluged it. and plug again but this time with disconnected baterry. screen stopped working. idk if its problem of the phone or the lcd, its any way to fix this? (Phone actally truns on but without display, can check with the dnd button)...
Chosen Solution I was browsing the web and left my computer for 5 minutes and when I came back it was frozen. So I shut it down with the power button and restarted. It froze again on the login screen. After shutting off again the macbook won’t turn on. No chime. The fan kept moving though. I tried the smc reset and pram reset. It turned on random tries but with the same issue of getting frozen up on the login screen....
Chosen Solution Has anyone experienced it like this too? arrived when hot conditions, even now 10 minutes after being ignited this line appears What should I do ? Do I have to change my screen? and is it sure to happen in all macbook pro 2017? device: MPXQ2 connect an external monitor to the mac and see if it is the same on the external monitor if it is ok then you have a screen problem if it is not ok then you do not have a screen problem This IS YOUR FIRST STEP...
Chosen Solution My MacBook won’t turn on and not charging I plug my charger it blinking green / orange what I do?? Which MacBook is it? If you don’t know look on the back and plug the serial number in here and it will tell you: https://everymac.com/ultimate-mac-lookup… It sounds like it is charging or trying to, let it charge for several hours. What is the history on this machine? I would try an SMC reset first....
Chosen Solution Whenever I plug in my earbuds my microphone doesn’t work. I can hear the person I’m talking with but they can’t hear me. Its worked a few times so I know that it can work. So my headphones work perfectly fine, except the mic. I can hear perfectly from the earbuds but whenever I make a video or call someone, all they hear is a buzzing sound. I don’t know how to fix it… does anyone know I i could...
Chosen Solution My phone has been on the charger for quite some time but still will not power on. When I hold the power button down, the back screen just has the phone logo on it and blinks back off, and continues to blink on and off while it’s on the charger. What do I do I really need my phone…there is no battery. @decaria , Ray , You did not state your model, so I will post pretty much generic information to try and help....
Chosen Solution i replaced my battery and put it back together. i noticed the home button was not working so i opened it up again and i fixed it. when i tried to turn on my phone nothing would happen. i made sure all things were connected and that it wasnt the lcd that was bad. please help i have tried everything and nothing works It sounds like you may have just gotten a defective battery...
Chosen Solution My laptop screen goes black for half a second when the screen is tilted downwards. When i put pressure on the right hinge it does not occur. I would have suspected the hinge was pressuring the display cable but according to the service guide the display cable is on the left hinge. What could be the problem and solution? Hi, You may have to open the laptop and check what may be loose or moving in the area near the right hinge....
Chosen Solution My laptop got burning smell, so i closed it. After getting diagnosed it was found that few parts needs to be changed: 5volt and 3volt power IC IO control IC Diodes and Registers. Please someone help me in understanding the approximate cost for these parts. Parts from $0.20 to $25.00 each, depending from where you are ordering it, parts are not the problem, labor is the high cost, a good technician will charge you from $150 by hour and up just for labor....
Chosen Solution Hi, I have a late 2009 iMac (EMC2309) which is having an issue with the LCD, the systems backlight will suddenly cut off (used to work around the issue by sleeping and waking the system then the back light would work for a few second to hours at a time) I have since opened the system and disconnected the V Sync cable and that has reduced the issue greatly (as long as I’m on full brightness) Does anyone know if replacing the backlight inverter will help or is the LCD itself failing?...
Chosen Solution I am working on my Lenovo Thnkpad e14 Gen 2, and was updating the BIOS. I lost power to the device during the update, and now I have a bricked device. I have tried all the simple fixes to no avail. I am looking to replace the BIOS chip, but I haven’t been able to find a schematic with its location. The board is 5B20W77573. The device is out of warranty, and I am comfortable in soldering the replacement chip in place....
Chosen Solution I changed wifi routers a while back, and since then I have to login each time the realpad is powered up. Is there a way to bypass this? I cannot find anything in the user manual you posted a link to. Thank you. Hi, Do you mean login to the WiFi network and not login to the tablet? If you mean the WiFi network, go to Settings > Wireless and Networks > WiFi, select the appropriate network and then select Forget this network....
Chosen Solution Looking for the rubber covers that sit over the screw holes on the screen that the screen screws screw into? Hi @crussell I think you’re talking about these rubber sleeves that go over the bezel mounts for the bottom screws? I’ve done a good search and I cannot locate any replacements online. You shouldn’t worry too much about them as they are not critical to the phone functionality in any way....
Chosen Solution All of a sudden my Macbook froze and after restarting the file with the question mark came up. I tried to load the HDD but it was missing. Since the SSD doesn’t have a cable to connect, is it probably a bad SSD? Update (08/12/2016) I tried to boot it up with the alt key pressed but it gives a black screen with the apple and then a circle with a cross through it....
Chosen Solution In the past I changed the battery and everything went well. Now, the magsafe gives a green light but the battery doesn’t charge. I tried every reset procedure (i.e. SMC reset) but with no luck. Is it worth to try to replace the DC-in Power Board ? At this point if the system is not able to start up your battery is not charging. You had stated the MagSafe charger LED is green....
Chosen Solution Hello, my charger socket doesn’t work like it should, that means that I can’t reallly charge my phone. If I want to charge it, I have to put it in a special position where the kable is somehow snapped off, then it works. I’m not sure why it is broken but I think it’s probably because I was to harsh with the kable. Is there any possibility to fix it?...
