Posts

Chosen Solution When i detach my joys cons both my them do not connect. I have tried everything like using a clean toothbrush to clean the pins but they still not work and also System setting>Controllers and sensors>Disconnect Controllers and it still does not work. It just trys to sync to the switch but i just cant, help? I do have the same problem, my switch doesn’t recognize any wireless controller, tried everything too, I know that the problem is inside the console but I don’t know how it can be fix

Chosen Solution My laptop Not turn on power and the adapter light turns off automatically when I plug in adapter to laptop. Try taking out the battery, press down and hold the power button for 30 seconds. Leaving the battery out plug in charger. Turn on. Does that work? Yes then replace battery.

Chosen Solution If I insert the memory card and press it down it just pops out. Does not engage. This youtube video may be able to help. https://www.youtube.com/watch?v=lL30UJib… Did not fix. The memory card was not broken.

Chosen Solution It started some weeks ago The simplest options are1. Try a new sim card. Even though sim cards don’t normally fail it is possible. Most post paid accounts offer free sim card replacement. Prepaid may require you buy a sim kit. 2. Try resetting network settings on the phone. 3. Possibly hardware issue with the charge port or antenna.

Chosen Solution i think my ipod got wet & some fungus grew in it In that case, disassemble it with the help of the guide available here iPod Nano 5th Generation Teardown Clean the logic board and all connectors and cables with isopropyl alcohol and let it dry out after you clean it. Check for obvious damage, i.e. bad solder points etc, replace the battery and re-assemble. If everything else seems to work except your play/pause button you might want to consider a new click wheel as well....

Chosen Solution Okay so my phone only charges when its off but when it turns on my phone doesn’t recognize that its being charged and then it dies. it comes back to life at 4 percent and dies. its not the cord because I’ve tried it on 2 different phones and it works perfectly fine on the other two. Again my phone only charges when its off but never when its on....

Chosen Solution I had my phone in my pocket and it over heated. It wouldn’t turn back on except to flash the logo for approximately 36 hours. After that the battery wouldn’t hold a charge for more than 3.5 hours and it gets hot. I sent it away to be fixed and they say they replaced the main board but its still getting really hot. Is it beyond repair?? @phaet1 first off if you send it for repair you should expect it to be fixed....

Chosen Solution My phone was low battery (8%) before I went into work and after few time it become turned off and I tried to turn on my phone. I’ve had it plugged on the charger, my phone felt cold so I assumed it might be too low of a temperature or something and it’s been over an hour of the same response whenever I try to power up. Did my battery damage or something?...

Chosen Solution My Toshiba Satellite both will not connect to the internet unless I am at home warren fischer this sounds like a setup isseu more than a hardware issue. Let us know how you connect at home and what OS your computer has. You are probably setup for your home network but not for a mobile network. I suggest that you download the owners manual for your computer from here and read through the stuff on here....

Chosen Solution My N64 hasn’t been turned on in a while, when I did try it the light turns on. After turning it off and on a few times, one of those times it turned on for minute with the game on screen, then turned off. This was the only time it turned on as of recent. Any ideas? Considering the age, I would start by checking the capacitors out. I found a forum where a user painstakingly created a schematic for board versions 03 and 04 http://www....

Chosen Solution Looking for a replacement battery for my Samsung Galaxy S2 Classic watch. Don’t know if the S2 is the same as the S2 Classic. Very good chance they are different. Really depends on the model number of the watch you have.

Chosen Solution Hi all. I’ve been troubleshooting a Mac mini A1176 for a little while now. When I power on the computer, the white LED shines without blinking and I can hear the CPU fan and optical drive start up. However, no video is coming from the Mac. Additionally, I can’t tell if there’s a startup chime because the built-in speaker appeared to be damaged. Here’s what I’ve done so far: Reset SMCChecked wire connections inside the MacCleaned out the internalsReplaced CPU thermal compound and replaced CPU with a Core 2 Duo T7400Replaced PRAM battery Would it be the integrated graphics, a faulty DVI connector, or something else causing the issue?...

Chosen Solution I’ve faced this a couple of times, and this is what happens - I face issues with peripherals - HDDs, keyboards, mice, sound cards, what have you. I reset the SMC and sometimes they work fine. I try to do a PRAM reset and the Mac mini goes into an endless reboot loop. If i forcefully turn it off by holding the power button and then boot while holding the alt/option key, I get a choice of hard disks to boot from, and then I boot into normalcy (so to speak)....

Chosen Solution So I have a Early 2011 Macbook Pro 13’ that won’t turn on. Basically, when I press the power button, the usual chime that tells you the machine is starting doesn’t go off and the only thing that I can hear working is the spinning hard drive? So I’ve opened the bottom case and confirmed that the fan doesn’t spin and the only thing that seems to be being powered is the hard drive....

Chosen Solution I tried to boot up my old Macintosh 165c but it just displays a blank screen. Thanks! Update (05/19/2022) Do you have the CD drive? Ok here’s how to replace the hard drive: Macintosh PowerBook 165c Hard Drive Replacement Original Mac OS:7.1 Supported Mac OS:7.1-7.5.1, 7.5.3-7.6.1 Details:Earlier and later versions of the Macintosh System/Finder and Mac OS are not supported. Given no other information, I would go with “failed hard drive”....

Chosen Solution Hello, I’m looking for the manual of “Cullis CTC-530AD” Auto Dialler. It is a very old electronic device but I think it is still working. I only don’t know how to record the message and do the setup to enter the phonenumbers ….. Has somebody here such a dialler at home with the manual? Greetings, Ronald, Ronald, ihre e-mail adresse? Hello Frank, Many thanks for your answer. My mail address is “ausloosr at hotmail dot com” I hope you can help me....

Chosen Solution My Sony A7S Mark 2 is moving the menu by it self please how do I fix this? hi, i have the same problem with my Sony A7ii. Menus switching on its own and sometimes goes back to normal then switching and scrolls again. Did you already FIX yours?? Thank you :)

Chosen Solution So I was flying my 3DR Solo Drone with my gopro and had a little crash and since than it seems my HDMI port does not work. Would you suggest to replace the motherboard? I have already tried different HDMI cables and plugging into different devices. Thanks! Hello @s1000r2016, The HDMI post is located on the motherboard of the GoPro Hero 4. So, the following is the replacement motherboard and then the tutorial on how to replace the motherboard in your gopro!...

Chosen Solution The micro USB port is worn or bent, such that it will only charge if the cable is held at just the right angle. And data transfer is out of the question! Is this a simple fix, or would I need to change out the whole motherboard? Watts Isnaim if your Samsung is indeed a Samsung Galaxy Tab 4 7.0 you will need to remove the motherboard. The charging port is soldered into the motherboard....

Chosen Solution I recently borrowed a phOne and cracked it so I need to replace the screen and phone. I bought a new phone off eBay but it has a password. If I replace the motherboard from the old to the one with the password, will the memory from the old go to the new? Basically want it to appear as no crack ever happened. I’m unable to hard reset the device because the phone only had 3 options on the hard reset mode....