Posts

Chosen Solution I left my switch in it’s carrying case for 6 months and forgot to charge it periodically. Now I’m getting no response when plugging the switch directly into power, and the blinking green light when plugging into the dock. i suspect the battery, but don’t have a replacement battery on hand. I have already opened the switch and disconnected the battery and held the power button down for 30 seconds to try and fully reset it....

Chosen Solution Hello, My client has the Lenovo F0D3 and it is stuck on the Lenovo screen boot loop. All attempts to safe boot, boot to recovery mode, boot from USB drive with windows for re-install don’t work. With the USB recovery stick in, the windows logo pops up for only 2 seconds before going back through the lenovo / windows screen flash boot loop. I played with bios boot options from UEFI to legacy and nothing....

Chosen Solution IS there a way to find the exact logic board configuration based on the serial number of the machine it came out of? If not, is the model of logic board printed on it anywhere? I have someone willing to give me a working logic board out of a 2015 iMac like mine that is dead but I want to find out if it is at least the same confirmation as mine or better?...

Chosen Solution hello all something really strange happened. i have an old laptop Compaq presario 2500, for many years it’s always been displaying the start screen with the logo COMPAQ displayed in red. then one day it started displaying HP invent without any reason at all. 2nd prob: when i put the battery in it wont power on. i remove the battery and it works just fine. can anybody give any explanation to these phenomenas ?...

Chosen Solution Hi there, Hope you are fine. Please, check this video: https://www.youtube.com/shorts/VAdzQVJH6… I want to setup my Mac Mini in vertical position. There are three options: (1) wires at the left and Apple logo turned 90 degrees to the left, (2) wires at the top and logo in standard position and (3) wires at the right and logo 90 degrees to the right. For positions (2) and (3) everything works fine....

Chosen Solution 13” Macbook Pro Retina (2015) suddenly died. I tried every key combination to revive it with no luck. I unplugged battery cable also what brings it down to potential problem with logic board… MagSafe LED is on while charging. There was no evident liquid spillage but after having closer look I noticed some green residue looking like a corrosion on a part of motherboard which is close to vents....

Chosen Solution My galaxy 10.1 keeps coming up with a message saying google.process isn’t working. It is running a bit slow and the battery needs replacing I think as it doesn’t last long but I wonder what that message means? It is sometimes very slow to respond to my swiping it. Hi cazglad , You can try to enter in DOWNLOAD MODE with POWER + VOLUME DOWN and load the stock rom again with Odin

Chosen Solution The microUSB connector of my my Polar A370 is broken. When I’ve contacted Polar Support asking about how to adquire as spare, the only option they do is sending the wristband for a repair, which will be expensive cause is not in guarantee period, and really I know how to replace the conncetor. So I’m looking for the conector, and any information about will be well received! (: Thanks and regards!...

Chosen Solution I have vespa et50 two stroke 1999, I believe it is 98/99 model therefore old engine and need parts but being in mid of change have to be sure it’s older or newer engine, can you resolve pls as no one seems to know and belt and rollers replacement, belt for newer model is 11mm longer and would not fit if mine older make Hello precious, ET2 50 made between 1996-2001 has the the following frame prefix: ZAPC160 Whereas the ET2 50 made between 2001-2005 has the following prefix: ZAPC381 https://de....

Chosen Solution I dropped my camera recently and I’ve tried various times to turn it on but it refuses to do so. First check the battery compartment door. There is a micro switch that turns the camera off when you open it. If the battery cover does not press down on the switch the camera won’t go on. Make sure that the battery compartment door covers the batteries so that the micro switch senses that the cover is closed....

Chosen Solution My hp f272wm has the charger light on but that is the only thing that is on. But when the battery is in it will blink red fast then blue long then red fast then blue real long then blue twice and the blue twice will repeat. But when I take the battery out it is solid blue but when I hit the power button it will not turn on....

Chosen Solution I was playing PUBG when all of a sudden my laptop shut off, no warning. Now it won’t turn on and the LED indicators don’t work, please advise. You did say the DC jack is a bit loose. I found a replacement DC jack here: https://www.newegg.com/Product/Product.a… and a video showing the dissasembly of the laptop, which seems to get far enough as the DC jack is exposed. https://www.youtube.com/watch?v=0vfoUkIa… at 2:48 in the video, you can see the red wire....

Chosen Solution My macbook suddenly died as soon as i plug my power cord with 30% battery. I tried to reset but did not work at all. Im not sure if it makes sense because i am in Philippines and power voltage is different . Might be short circuited? Please help. Im losing it and its covid lockdown. :( Hope you figured it out but if not - your Mac most probably alive....

Chosen Solution I recently replaced my iPad Pro 10.5 battery and now i’m finding I cannot get it to charge . It appears to be charging but it never makes gains on the battery meter. If this battery is the one you replaced yourself try using the original battery and calling iFixit to get a new battery. I am not sure Apple can help because you know you can void warranty and they will not service it....

Chosen Solution Why would my phone keep shutting off even when battery is at 55%? No water damage etc… @kiser32 your battery could be lying. Not uncommon to have the battery report a certain percentage but then crump. Start by replacing the battery with a new one and then re-evaluate. If nothing else it will give you a know-well place to start further troubleshooting if necessary. Motorola Droid Turbo Battery Replacement...

Chosen Solution My Kindle Fire HD 8 touch screen does not work. I did a hard reset butbthe screen does not let me do anything. Hi Susan, A wonderful student group from the University of South Florida created a troubleshooting page to help you identify what’s going on with your device. If you find that your screen needs replacing, you can find the part here and all of the tools needed in the iFixit parts store....

Chosen Solution Where can I get a tiny screw driver to undo and then clean the latch on the side of my Fitbit? Alternatively where can I find a repairer to dojo ? Hello Terence As you can see in the following picture, you will need a Torx-t3 screwdriver. You can order it on this site or in any other hardware or electronic components store. T3 Torx Screwdriver Be well; Homer82

Chosen Solution Leappad 2 was syncing, but then switched off due to low battery. Plugged in again it it is now stuck on ‘tuning up-0%’ Is there anyway you can do a reset to factory settings? Yes you have to connect it to a PC then press Settings then Reset LeapPad 2 Note doing this This will erase everything.

Chosen Solution I have recently restored a 1949 Westinghouse refrigerator that I received from a neighbour downsizing. They told me it worked last they had it running. There was no way to confirm this as when I got it the wires were torn from the compressor. So I continued with the restoration, finished, figured out the wiring of the compressor, plugged it in and boom, she fired right up. Within minutes the ice box was ice cold, walls of the refrigerator were cold, all good signs to someone who doesn’t do this work for a living....

Chosen Solution Hello everyone! I ordered 2 RAM plates (4GB each) that are compatible for my iMac and installed them carefully into the empty slots. I had 2 RAM plates already installed on my iMac 2GB each. My RAM plates are DDR3 1333 Mhz which I checked when I bought the new ones. My Mac only shuts down randomly when I work on things that are hard to process so its hard for me to tell why it does that....