Chosen Solution My lights,tail, brake, dash and flashers do not work. When I turn the lights on sometimes for about 30 seconds they come on but always go out. Sometimes I’ll have brake lights but they never stay on much longer. I’ve changed all the fuses twice now. I’ve been trying to run shorts down but I am now at a wits end.I have also changed the light switch and ingnition switch....
Chosen Solution How much chain new Claes in my phone, and how long time? I’ve changed the screen on many lg g3-g5 models, generally you can buy the screen/digitizer combo online (I recomend buying the digitizer and screen together as they are hard to seperate), and the combo is relatively inexpensive, it literally takes me about 10 minutes to change it now. Not sure what phone you have, but it’s generally not as difficult as you think if the parts are readily available....
Chosen Solution Hi i have a Samsung S6 and i was having problems with it so i decided to reset it so i did so it was working fine all day then i put it on the charge over night i woke up and its now in a boot loop but the led is flashing yellow (because i had a snapchat notification) but my phone is fully off but the led it still flashing yellow anyway i can’t boot it into recovery mode the only thing i can do is boot up the download one so i went on my laptop and downloaded a new frimwere install it but it is still in a boot loop and thr led is still flashing yellow I’ve spend all day doing what videos/wedsites have be telling me to do and its still doing the same thing if you can help me figure it out i would really appreciate it thanks....
Chosen Solution It doesn’t go completely black. It’s the entire screen and not just partial. It’s like I turned the brightness way down. To compensate I turned it up but cant turn it up enough. Still too dark. What’s wrong can it be fixed? @huntingfish247 we’d need to know the exact model number to be specific. At this point it sounds like the power supply is starting to fail and not supplying enough power to the LED’s....
Chosen Solution I’ve repasted my Lenovo Legion Y530, and also upgraded the RAM. I was stupid and forgot to disconnect the battery before the process. However the laptop worked fine for an hour after reassembly, but then the screen suddenly went dark. (the connected external monitor is dark as well) The device still starts up (windows welcome sound), the fans are spinning, keyboard lights are on, but the screen remains black I’ve tried battery removal and discharging, and also tried to enter the BIOS but all i got was 12 short beeps followed by 1 separate beep....
Chosen Solution The light switch in mine causes the ice maker to stop working. I taped over the switch to keep it from working and that solved the ice maker problem. Go figure. Update (11/12/2022) @jayeff Mine is #WRF535SWHV00 Hi @Polly Bennett The refrigerator door switch is part #W11384469 The freezer door switch is part #W11396033 Search online using the part # only to find suppliers that suit you best. Here’s a link with a video that may help if you decide to change it Be safety aware and disconnect the power to the refrigerator when changing the switch as there’s lethal AC voltage on it when the power is connected
Chosen Solution I have a velodyne ct150 subwoofer. I have power and the amp is working. I plug the rca jack in half way I get a loud hum that can be controlled by the gun knob. Once the rca jack is fully set I get no sound at all. @sturg appears to be that something is grounding out. You need to let us know what you connect with the RCA plug and where you plug it into....
Chosen Solution MacBook Air starts heating up and down on the right side of the keyboard, near the power and volume buttons, and it consuming battery faster, it lasting about 2 hours. I did all the processes recommended by Apple, and the diagnostic was an issue on the thunderbolt hardware. I installed TG Pro and it showing this temperatures: Please, help me ! Thanks Update (10/26/2017) Thanks for answer me. I don’t think this heating is fine, because it’s burning my fingers… I have never felt these temperature before....
Chosen Solution The fan only spins when I hold the power button for 10secs and connect MagSafe while holding the power button for another 10secs. Have done NRAM and SMC reset, nothing happens. MagSafe shows an orange light. Lets try this, follow this guide MacBook Pro 13" Retina Display Early 2015 Battery Replacement just disconnecting the battery following the Steps to Step 6. Now set the system on its side so you can gain access to the keyboard with the battery connection not shorting....
Chosen Solution Its for my cell phone not PC Go to all your apps and remove cache. Then invest in Google Photos. It backs up your pics online and deletes them on storage, still accessible on a decent connection. Cheers!
Chosen Solution The microphone doesn’t work after I’ve replaced the back case and screen assembly. The rest of the Lightning Assembly works fine but not the mic. Anyone else run into this problem and resolved it? Everything looks like it’s in the right place after a visual inspection. I would disassemble the charge port/dock connector to see if the main mic cable has been damaged. Also double check the front camera assembly and see if the speaker mic cable is damaged....
Chosen Solution To confirm the model type, it is a black case with white letters, that model #. The current firmware is 5.8.1. This is the Paperwhite with WiFi and International Mobile connectivity @madtad1 looks like the last supported firmware is 5.13.2 Check on here for more information about that.
Chosen Solution I have a copy of New Super Mario Bros. that loads just fine on my DSi XL but won’t load on my New 3DS XL. It detects the game, but when it loads it says that an error has occurred. The 3DS loaded my copy of Pokemon Black just fine. I’m going to continue trying things to see if I can get it to work properly, but if anyone knows of anything specific that could be causing this issue, I’d appreciate a solution....
Chosen Solution The mic on my afterglow headset (for xbox one) doesn’t pick up any sound. The sound is fine, I can hear everything but I can’t speak. There is no visible damage to it from the outside. How can I fix it/ open up the headset to get a better look? here is a video I made a while back https://www.youtube.com/watch?v=Z7zCUtC2… The wires for the mic might just be worn out and need resoldering, screws to open the cans are usually under the foam cups and often just phillips screws
Chosen Solution Whenever I turn on, or open my Cambio the screen defaults to portrait. I have gone through the settings, changed it to landscape and hit apply. It will change and stay on landscape until I close it, or turn it back on. It’s probably in tablet mode. In settings can change this. Set it to not auto rotate. Hope this helps.
Chosen Solution when i put the CD in my Boombox, close it and press play, it does not spin. Laser Lense Replacement Guide I think your motor might not be working anymore that’s what makes the CD spin. You should check out the link above for steps on how to get to the motor inside the boombox. If that doesn’t work maybe its the laser that reads the CD. You can buy a replacement laser lense online and follow the steps in the link above to replace the old laser....
Chosen Solution My iPhone battery stucks at different percentage on screen. Suppose it is now stucked at 71% and if I connect charger then nothing changes. But if I restart the phone then the percentage will change to some other digit and will remain fixed until I restart again. I changed the battery but the issue still remains. What to do now? This is either bad battery, or a missing component, FL11, near the battery connector on the motherboard....
Chosen Solution Unexpectedly, my packard bell EasyNote TE laptop cant switch on. Although the adapter has power. Does it do absolutely nothing? No lights no sounds whatsoever? You can try: Remove the battery and try again.Run on just the battery.
Chosen Solution Need help. Does anyone knows how to fix this? The screen has all these colorful lines like green, red, blue and yellow and also on top of that it has this white thing that appeared on the top part of the screen, i pressed on the screen to hold it because i was doing something else and didn’t want to drop it and I think I put too much pressure on it and then when I did that whole thing just popped up!...
Chosen Solution Actually i had dropped my phone 5 months earlier , but there was only a minor crack on its gorilla and nothing happened to the phone. It worked well till today and when i was using it its screen suddenly went blank . But i can start the phone , receive the calls everything working well except the blank screen. Please tell me how to fix it. Sounds to me like a damaged LCD....
