Posts

Chosen Solution I manage a hotel and my handheld panasonic phone wont ring at all. This phone is connected to a NEC DTH-16D-2 Elite landline. The only phone that will ring is the NEC DTH-16D-2 Elite phone. Does anyone know how I could fix this? Hi, Can you call out from the phone OK, you didn’t say? Have you checked if the phone is in silent mode? Here’s an image taken from the KX-TG6641 user manual that shows how to turn on/ off silent mode....

Chosen Solution My alcatel wont turn on. I tried charging it but the white light comes on and that’s it. I tried hard resting it but that didn’t work. I tried taking the battery out and that didn’t work. Please help me. It new and I had it for 3 months but I dont have a warranty. So Bring it back where you purchased it maybe they can help Write full firmware upgrade

Chosen Solution It won’t turn on at all!!!! Please Try Removing your Battery And Unplug it from charger Press the power Key and Hold It For 20 Sec and than Leave it See if the power Turns Back On See if this Helps You Can Also unplug the battery and wait for 2 min and plug it back Plug the charger and battery back to the power See if this Fix your problem thanks...

Chosen Solution hello i have a kindle that needs a new firmware, along the path of fixing i made a fastboot cable, pc wasn’t able to detect the device at first however, if i push the plug into the kindle, it gets recognized as tate pvt 8, which is good but when i use the adb drivers for it, i get “this device cannot start error 10”, im going to try on a fresh install of windows then linux, if the problem persists i may change the usb port whats ur input, will this be useful and not a waste of time ?...

Chosen Solution I have a Microsoft Surface 3, and I am unsure what to do. The fans or the laptop itself has been buzzing with the screen going black (crashing). Initially, I didn’t think it was a problem until recently. It started to affect my studies, with crashes reoccurring more frequently (2-3 times yesterday during classes). As a uni student, I rely on my laptop to do my assignments and participate in classes....

Chosen Solution My laptop has stopped working with the projector. The projector works with another laptop. What is on my laptop desktop does not display on the projector screen. Tried holding down the FN key with all the other F keys. You said your projector is worked on another laptop, so the projector is find, so i think this laptop maybe had no projector driver. So try to connect the projector to the laptop, check all the port and then enter the device manager, try to install the projector at first....

Chosen Solution After all of the helpful info on this site I downloaded the service manual, printed it up and worked through all the steps. Got weird values when testing per the manual but didn’t get error indicator on control board so I dug a little deeper into the ridiculous latch/switch. I knew there is a magnet on the lid so there had to be a reed switch, using a magnifier I found it and saw it was cracked....

Chosen Solution I have a locked iphone six (locked due to cracked screen) and it is no longer detected in itunes unless in recovery mode. Please help! Update (07/25/2019) Is there anyway to save the data off it? There are some old photos I want to keep. If it says iPhone disabled connect to iTunes the device must be restored using the steps here: https://support.apple.com/en-au/HT204306

Chosen Solution When I bought my MacBook 3 years ago it made a strange metal scraping sound for a short while at the setup. But after that, I didn’t hear it again until a year ago. It only appeared in specific situations (start of a Cinebench CPU test or when extracting a lot of small files like an update). At the beginning of this year, I brought it to a certified repair center and they replaced the fan....

Chosen Solution My wife’s MacBook Pro was dropped a while back. Ever since it has made a low humming sound that drives me crazy. It seems to be coming from the right fan and indeed sounds like a rotating noise. The heat sink was damaged in the fall, and I have already replaced that. I was hoping that would fix the noise, but it did not. While replacing the heat sink, I also removed the right fan, inspected it for damage, and cleaned it thoroughly....

Chosen Solution Hi All, I was hoping to find an answer here by reading through old posts, but so far I haven’t come across an answer. Forgive me if I’m repeating something that’s already been discussed. Specs as follows…. Model: A1347 Mac Mini Core 2 Duo 2.4 (Mid-2010) 2 GB RAM 360GB (5400 RPM) I recently purchased a Samsung 850 EVO 500GB SSD and two Corsair 4GB (1066) RAM. A friend of mine just did this almost exact same upgrade (he has mid-2011 mini so used 1333 RAM) and had no issues....

Chosen Solution Hi, After updating to mojave, a friends macbook doesn’t boot anymore. First it did but the touch bar wasn’t working. After that, it didn’t boot anymore. The backlight is turning on but no feedback from the macbook, no chime, no beep, no apple logo. I tried a lot of short cuts already (NVRAM and SMC reset) but since there is no feedback at all, it seems like the commands are not getting executed at all....

Chosen Solution I have a MacBook Pro 15" Retina Display Mid 2015 A1398 (EMC 2910) 2.5 GHz (Dual Graphics) Product and i was wondering if i can switch the 2.5CHz logic board i have originally and upgrade it to a 2.8 GHz logic board, would they be interchangeable/compatible? thank you, Ronald B There are two flavors of 2015 MacBook Pro’s. The intergraded graphics only models (IG) and the discreet graphics models (DG) 2015 15” MacBook Pro (IG) 2015 15” MacBook Pro (DG) Replacing like for like is no big issue....

Chosen Solution My Brother MFC-240C prints in black, but in none of the colors. I have already installed new original Brother ink cartridges, and executed multiple Normal/Power Purge runs (using the Maintenance Mode as described in the service manual, chapter 9 / 9-43). The problem persists. Can anybody help? Has anybody successfully disassembled the printer, and cleaned manually the ink supply tubes and/or the printing head? Print head could be clogged and needs some cleaning....

Chosen Solution My MacBook Pro (A1989) should have two hall sensors on most extreme position of motherboard. I found out, that my MacBook has only one. The other sensor pins has just connected two connection positions (middle two facing towards display). From time to time, it happens, that when I close the lid, Mac falls to hibernation, but does not wake up, when I close the lid. I am puzzled. I was wondering, where to get second sensor, or how to make this more stable....

Chosen Solution I have a Asus X550L which is not functioning anymore due to short circuit as what the technician said, the problem was its on board power chip which they said they have to replace the entire mother board which is cost a lot. so does anyone can share a diagram of this or anyone knows the exact details on that power chip because now a days Im sure we can search or order it online....

Chosen Solution I recently bought a Nintendo 3ds and after a month of playing it, it just shut off. Every time i press the power button, the blue power light shines for three to five seconds and then shuts off with a loud powering off sound. The system never completely turns on. might have been dropped damaging the top screen, or the cable may have worn over time - open it up and push the top screen cable fully in...

Chosen Solution Can you teach me how to change it? @dioniss even tho this is not a guide, the teardown will show you ater least how to get to the camera Samsung Galaxy A51 Teardown If you are looking for more directions, check something like this video

Chosen Solution My daughter dropped her next book and busted the casing around where the charger goes so now it won’t charge correctly. Can it be fixed? I was charging my nextbook 8 when it was all the way charged I could not turn it on the screen what even light up what is wrong with it.

Chosen Solution My electric kettle stopped heating. All of its buttons still lit up easily, yet didn’t heat. I thought I could take it apart to fix it, but nothing looks obviously wrong to me. If anyone has experience and sees anything that could be replaced please let me know. Thanks! Hi @tnemi, What is the make and model number of the kettle? Most likely either the heater element has burned out or perhaps the thermostat cut-off switch is faulty....