Chosen Solution After switching my imac hard drive and putting back together all worked well apart from the fact I had forgotten to plug in the temp sensor for the hard drive in so the fans were spinning loud So I took it apart and re assembled the imac however there was no display but a chime. Upon further inspection I found I had damaged the display connector on the logic board and the LVDS cable....
Chosen Solution About 6 months ago, my computer fell from the hook on a door to the ground. Although it was in a case and a backpack, the top left corner of the inner panel separated a little from the outer cover panel and the metal panel that is inside there also got a little warped. Everything has worked fine, but the battery life since then has sucked. Sometimes it seems to charge slower than it should, but mostly there is just less battery life than there used to be....
Chosen Solution Logic board pulled from: EMC2834 MK462LL/A Can someone identify these parts and direct me to where I can order them, thanks! MX25L6473EZNI-10G. You’ll still need to program it. The damaged SMT resistors & capacitors will need to be found on the schematics for this system.
Chosen Solution Hi everyone, yesterday I did upgrade my macmini late 2014. I installed a 500GB SSD samsung. Once the mac has been restored no longer signs of life. The fan rotates for 1 second and then stops. Can anyone help me? Thank you Carefully pop off the bottom cover and disconnect the 2.5" SATA SSD are you able to get the Apple logo with the blinking question mark? If you don’t get the POST chime then it’s likely something hardware related....
Chosen Solution Hi! My Mac Pro 2.8GHZ 8-Core Early 2008 won’t wake up from sleep mode now that it has Mountain Lion. I have found it asleep a few times now, and pressing the power button doesn’t wake it up. When I manually put it into sleep mode, it has the same problem. I’ve set Energy Saver to never go to sleep, and that seems to work, but it would be nice to not have to do that....
Chosen Solution My MacBook Pro Late 2016 (Touchbar) immediately shutdown after i tried to insert an external USB 2.0 to USB C Adapter connected with a keyboard and Power Adapter cable. Macbook won’t boot up anymore. Is it because of the exceeded high voltage of the USB Adapter??? I really hope there’s a solution to this because since the SSD is soldered onto the Motherboard I’m not able to recover my data....
Chosen Solution MacBook Pro a1278 i5 stopped turning on I changed the battery and it’s working again, but it’s not charging the battery, what could it be? It may be a problem with the motherboard or screen. Have you checked out the troubleshooting page from Ifixit? MacBook Pro 13" Unibody Troubleshooting I would check the battery using this gem of an app CoconutBattery post a snapshot of the apps main window....
Chosen Solution Hello guys, So after reading a lot about the topic I still have issues with my macbook pro. So long story short, at time ‘‘A’’ I replaced the megsafe cord with one i bought . Never thought worked 100% because the light not always work and sometimes i connect to mac and it doesn t charge. At time ‘‘B’’ original macbook pro battery died and mac only works connected to cable cord....
Chosen Solution My 2013 macbook air running (i believe) OS X Mojave wont boot. It stays on the black loading screen with the progress bar loading very slowly and when it is full after a while shuts off the mac. I’ve tried resetting the SMC, the NVRAM, PRAM, booting into safe mode and recovery (both internet and local recovery) . Safe mode or recovery both were not able to boot. I’ve created a bootable USB to reinstall the OS, however when booting from the USB the progress bar is very slow and eventually doesn’t boot from the USB....
Chosen Solution Bought used Makita bhp456 and turns out it has peoblem - when trigger is released it doesnt stop itself,there is no brake. The drill keeps spinning until it slowly comes to stop. It keeps spinning without power,like in neutral,just the inertia of the mottor. What could cause the problem and what could be the fix? It doesn’t have warranty. Ok, first check to see if the trigger lockout has been engaged, it’s a small level at the top of the trigger ( I know this sounds silly, but it happens sometimes)....
Chosen Solution My printer prints the entire page, but then when it feeds the page to the front tray after printing it comes partially out, then you hear the rollers spinning, and then it displays front jam. There is nothing visibly stuck in the machine, having followed the troubleshooting steps several times. Pulling the paper out and then lifting the front of the machine and then closing it clears the jam message and resets the machine, but it does this every time I print....
Chosen Solution Hi! I did a repair this weekend which included the removal of the logicboard (I replaced the battery on the back). Everything went well and the iMac works just fine now afterwards. But the built in microphone seams dead, the bars in the sound setting doesn’t show any life what so ever when I test it in the sound settings. So I’m thinking that perhaps I forgot a connector or something, I don’t know....
Chosen Solution The microphone on my daughters Samsung Galaxy A51 will not work. I have tried cleaning it, restarting the phone, clearing caches, and am at a lost. How can I fix it?? Hi @rosiecheeks , Try using the earphones with the microphone attachment or using the phone in loudspeaker mode and check if you can be heard when on a call. If so then this proves that the voice transmission circuitry is working....
Chosen Solution Maytag Microwave MMW5208WS-1 Microwave is no longer heating properly. I hooked it up to a device to monitor wattage and tested. After the unit is unplugged and plugged in again it will heat at approximately to 1980 watts for 30 seconds, after 30 seconds wattage immediately drops to approximately 140 and stays there for the rest of the cycle. The microwave still appears to be running normally lights, turntable and fan are operating....
Chosen Solution I opened my Surface Laptop Go after dinner and the screen blinked 2-3 times and then was filled with multi colored snow. Reminded me of the fuzz on a 1980s era color tv when you turned on broadcast TV waiting for Saturday morning cartoons to start at 5:30 a.m.It resolved after a moment, came back twice, and then a third time on the bottom half of the screen (top was white....
Chosen Solution I need for bypass or any other way to login from factory reset. My girlfriend forgot google login info and I don’t have a pc. Plus, developer mode isn’t on. I need help bypassing google frp for my $150.00 Samsung J3V paperweight. Plus, she &&^&@@ a J2 Dash as well. She’s getting expensive, but love had no price, but it does into debt. LOL. For the love of God please help me....
Chosen Solution Is Apples diagnostic suite free for iMac 2008 that’s out of warranty? I mean at the Apple store. Update (01/09/2018) @danj @captainsnowball Here is a video of it: So when I turn it on it has all but one LED lit that’s the 4th led for display. After a couple seconds it automatically restarts cause the display isn’t responding. Then it just stays like that until I turn it off....
Chosen Solution Please I need an urgent assistance. My Lenovo tab has not being charging for some days now. The battery ran down completely and since the it has refused to charge. What do I do please? First, plug it into other cables like a wall cable or use other adaptors and plug it in, replace the charger or replace the battery , clean the charger port (if possible)
Chosen Solution Lenovo TB-X104F My Lenovo tablet after only about two months of use switched off and never came back on again until I discovered it packed away so I got it out charged it up and it was all great, as brand new in fact. Then again after about two weeks it just went dark and no nothing at all. Been trying all the basics I can through charging it up, pressing buttons for so long etc....
Chosen Solution I’ve been using the charger that came with the phone for a long time. Then one morning, it will not charge, at all. I’ve tried different outlets and chargers, no help. Can someone please help me? First check to make sure charging port is not blocked by any debris and plug into supplied charger. If phone continues not charging try plugging into supplied charger and wiggling up and down it to see if charging pins are broken....
