Chosen Solution L button constantly registers input. I temporarily disabled it from the settings menu and set capture button in it’s stead, but this is not ideal. I googled some and it appears I can purchase both L button (although replacing it would require some soldering I imagine) and the whole left circuit board which has all left hand inputs. My question is: which one would be easier to replace and… can you guys suggest me a good guide?...
Chosen Solution Hello! I have Acer Aspire One D257 with Windows 7 installed. Everything worked absolutely fine. I wanted to upgrade the RAM so I changed the 1GB DDR3 Stick to 4GB DDR3 Stick. Now, after I click the power switch I can hear the fan spinning but there is no display on internal or external monitor and I hear no sound. Only sound is a strong beep that happens when I unplug or plug in the power cord....
Chosen Solution So, decided to take a look at my iMac. A few years back I accidentally damaged the LCD display when I opened up the device (wanted to replace my HDD). I think the problem lies with the LCD connector (surprise, like most of the questions, already asked). Back in the days, I bought a new cable, because I noticed the pins were destroyed on the cable. But couldn’t get it working with the new cable, unfortunately....
Chosen Solution My brother got an Ipad 6th generation A1893 for school because of remote learning. He ended up cracking the screen pretty bad i i just replaced the glass. before taking off the LCD the ipad was dead, but when i pressed and held the power button the dead battery icon showed. took off the digitizer and replaced it and put back the LCD and nothing is coming up now....
Chosen Solution hey all. 2nd time i come across this on iPhone 6 this week. very very low call volume. i reset the phone just to make sure. i changed the earpiece with no success and also the top earpiece. still call volume is very low. please advise! thanks a ton. Have you tried restoring the phone? Hi Kindly Replace the front ear speaker filters in that might be dust ll be covered and you Cant Hear Full Voice so Please Change the filter Hope it Works Thanks Varun...
Chosen Solution I recently tried using my a HDMI Splitter on my Mac mini (Late 2014) to use a projector and another tv as monitors (apart from the tv I use as the Mac monitor), and it crapped out. The computer restarted, and I began having trouble using the HDMI port. As long as I don’t plug in the projector to it, it does fine, and if using a thunderbolt to HDMI adapter I can use 2 monitors no problem....
Chosen Solution I bought a 2nd hand MacBook Pro mid 2012 15" I tried using it before I closed the deal and pay for it, but when I tried it using again doing some regular browsing, the LCD flickered suddenly and I was shocked! When you move your cursor across the screen there’s green, purple flicker popping up, and as you move the cursor it disappears and reappear to another area of the screen, I tried using different browser, and went to different website thinking the websites heavy display causes the flicker but they don’t....
Chosen Solution Hi Ordered a replacement superdrive (MATSHITA DVD+/-RW UJ-857G) for my MacBook in november from you. Installment was easy but cant get it to run, need to upgrade my superdrive firmware. I need help find out what firmware its compatible to my OS (OSX 10.4.11) and the superdrive i bought from you. What I found so far: SuperDrive Firmware Update v2.0 (not working on my OS compatible up to 10....
Chosen Solution Dear all, I have an early 2011 macbook pro. If I plug in the charger it says that the battery is not charging, but it also drains power from the battery. If I disconnect the battery, try to make it work with only the charger, in the cases it actually boots, the computer is really slow and turns off after a few minutes. If the battery still have some juice the computer behaves normally....
Chosen Solution Hi. This is my first post on iFixit. I import and sell iPhone screens. I sell iPhone 5, 5S, 6 and so on.. i get Them from the same supplier. The problem is.. MANY of my iPhone 5S have ghost touch. The screen taps random letters it self when typing a message, and so on. The feedback on the suppliers product page is 4.9/5.0 stars, and the supplier just tell me to send the sceeens back to get a replacement....
Chosen Solution I replaced my charging port with an iFixit replacement. After putting back together everything works as expected except for the mic when not on speaker phone. From my research, the mic is part of the charging assembly. I am wondering if I received a defective part? I am going to take apart again in check all connections. I’m wondering if anyone else has suggestions… Thanks! I would imagine it’s defective....
Chosen Solution Hi all, i have this iPhone 5 that when i make a call the microphone do not work very well, during face time video recording all works fine only on gsm calls it doesn’t work properly they hear me really far away i’ve changed the charging dock where the microphone is is possible that is the microphone on the back of the phone near the camera that cancels the noice during a call?...
Chosen Solution It might be a no brainer, I’d like to ask if I replace the existing logic board will the SMC and PRAM also be new? SMC is the System Management Computer chip, Yes! Your system has a few computing elements. In this case this micro-processor is responsible for the care and feeding of the main CPU both from power and cooling. It monitors different sensors within your system to do this task....
Chosen Solution i have husqvarna model EZ5426BI mower deck will not engage. Just had the mower serviced than was mowing the lawn and IZT belt broke and was replaced and found the Deck belt had crack so I replaced it and now the deck will not engage You might want to check you ingagement lever and see if the cord that goes from the lever to your deck is broke
Chosen Solution I have iphone 6s which is out of warranty. It start showing no service i don’t know why i dont even drop it. I also contact apple they said it cant be repair you have to buy new and i almost try everything after everything I switch off my phone and leave it for 2 days and when I switch it on it got network and it start working fine but after 8 days its again start showing no service but when I switch it off for day it got network and it work fine for 1 or 2 days after that its start show no service ....
Chosen Solution When I insert a microSD card into my tablet, it doesn’t stick and have a click sound as it usually does. It just springs back up and is unreadable. What should I do? The spring which may be holding the slot in place is probably no longer in the correct spot, possibly due to a drop. This happened on my old Samsung tablet, if you really want to, you can just take it out, but you would have a hard time with it still....
Chosen Solution i want to replace a real camera of my phone ,,but compatible is not available in my place Sorry, but you must use camera which is made for Huawei P8 Lite. You can’t use camera from other devices (even from the same manufacturer), the connector won’t let you do this. I would recommend you to google for spare parts or buy an broken phone from second-hand and repair it yourself cheaply....
Chosen Solution My phone is not switching on. Firstly, it was switched on but displayed an error message that - “Not registered on the network”. So I switched off the phone and removed the sim and re-inserted the sim again with the battery properly. But then the phone was not switching on.. paramjitkaur2223 remove that Sim card and see if your phone turns on. If it does not, leave it out and remove the battery....
Chosen Solution My phone completely died so I plugged it up to my charger (which I had bought the day before) and the battery sign showed up notifying me that it was charging. I left it alone so it could charge. I came back an hour later and it still hadn’t charged enough to power on. I left it plugged up for another 4 hours and it just stayed on the charging symbol....
Chosen Solution When I press the power button of my laptop for the first time to turn it on, it doesn’t turn on but LED indicator turns on, after forced shut downs several times it starts and works just fine. If I shut down it for short duration it starts without any problem but if the duration is long it doesn’t start in the normal way. I don’t have any experience with this particular laptop but the first thing I do when I have strange issues with laptops is 1 remove all power after shutdown including power brick and battery if possible....
