Chosen Solution Turned on my LG 65UF6800 one day and all I got was the right half black and the other half was a random color that would change every couple minutes. No sound, no menus, nothing. Tried resetting, nothing. If the problem is a board, I’d love to know which one before I have to go through them all one by one. @slicergba going strictly by your description, this sounds like a bad t-con board....
Chosen Solution I bought my tablet off someone and when turned on it says too many attempts to unlock and is asking for email and password i dont know them looked up the unlock sets it goes through the process but when the android pops up it doesnt give me the other options that are mentioned about resetting how can i go about this ?? Use this method https://www.youtube.com/watch?v=a1LOHEH6…
Chosen Solution loudspeaker on iPhone 6s very quiet. I changed the speaker 3 times with other used phones and it is still the same. Either ALL the loudspeakers are faulty/worn out or could it be something else? Is there anything else eg Logic Board fault that can cause an issue? Check the speaker holes on the bottom of the phone aren’t clogged up with dirt.
Chosen Solution Battery Replacement Failed - battery shows 78% and Replace now. I tried resetting PRAM, SMC, everything. Battery will NOT charge. Followed your instructions to the letter. The only problem I encountered was I had two phillips head screws, but because you did not include a phillips head screw for your kit, I was screwed. I eventually got it fixed, but the battery is defective.
Chosen Solution My MBP is suddenly stopped charging but it does not discharge when it’s connected to the power adapter. coconut battery is says there is nothing wrong with the battery and it doesn’t recognize that the power adapter is plugged in but it is not discharging either I have tried SMC reset several times with no luck. First inspect the MagSafe connections following this Apple T/N Apple Portables: Troubleshooting MagSafe adapters....
Chosen Solution My MacBook Pro won’t startup. The startup screen appears with the apple logo and a loading bar, writing then appears saying ’ launchd died\nState at last Exception among other blocks of text If you get a kernel panic than it is either a software problem, the operating system has gone corrupt, or it could be a hardware issue. If it is hardware then it is most likely either the hard drive or the SATA cable, the cable that gives power to and reads your hard drive....
Chosen Solution Hi I used your guide to replace the speaker but now it won’t turn on The first run after reconnecting everything the speakers worked perfectly I had to reset date and time but it didn’t recognize the battery it appeared with an x on the display So I reopened I it to check if every thing was plugged in correctly It was but when I connected the charger the light(green or orange) on the charger wouldn’t lit and now I can’t get the computer to start ,to turn on Any advice?...
Chosen Solution I change the Plug spark when I start the engine the timing is change what cause that and how i can fix it On most cars, there is no adjustment to timing. Sensors pick up the crankshaft and camshaft position and the computer decides what the timing should be. You didn’t say what engine you have and you didn’t describe a problem. Try not to fix what isn’t broken :)
Chosen Solution When I press my phone icon to make a call, my medical ID comes up. If I press either “done” or “cancel”, nothing happens. I can no longer get to my phone on my Iphone 7+. this just happened. You can read about this problem on the Apple Support website. It may be some kind of software bug. Or check for updates iOS to the latest version, as well as the program with your Medical ID....
Chosen Solution I have a 97 Camry its an automatic v6 it recently broke down after it Was running fine went into the store bought groceries came out acted like the battery was dead car wouldn’t attempt to crank. Tried jumping it nothing happened. 5 days later I went with car trailer to pick it up put the key in turned the ignition to on. Position and it started but starter wont disengage now....
Chosen Solution When I go to take a picture it will let me press the capture button but it won’t show up on my files, and everytime I go to open instagram or another app the phone will either force close or shut off completely and when I try to restart it, it says that I have no battery even though it had a full battery before it shut off by itself....
Chosen Solution my laptop is damped in my backpack in a heavy rain. I don’t think it was water damaged though. When I try to turn it on, my keyboard would light up and the laptop then shuts down. It happened yesterday and today I opened the back of it trying to let it dry. Is there still chances of fixing it? It’s fairly new and shipping it all the way to factory is really expensive....
Chosen Solution I’ve only had this for about 4 days and my keyboard doesn’t want to connect to my tablet. I assume it is bluetooth? If so, 1 ensure it is connected, ( if not, connect it). Then go to bluetooth devices and make sure it is identified as a keyboard. and showing there. if not , connect it. Go to pairing mode on the tablet and keyboard and select the keyboard on the discovered list on the phone it should now be paired....
Chosen Solution I need help. My laptop sometimes acts weird like, I can’t click anything but my mouse still working and able to move on screen. It usually happens when I’m switching tabs between software. my laptop sometimes also suddenly mouseclicking and scrollclick on itself. I’ve updated windows/GPU and drives but still happening. need help Hi, Disable the touchpad (Fn+F10) and use a USB mouse connected to the laptop to navigate and check if the problem is still there or not....
Chosen Solution My left pedal arm is damaged. Can I get a spare one This part is called a Crank. You can buy cranksets but cannot buy a singular crank. There are many companies that sell cranks, the one on the Marlin 7 would be a Shimano one, so it would be best to buy a Shimano Deore Crankset or similar from you local bike shop or online from anywhere around $80 up to over $300 (AUD)....
Chosen Solution My LG TV also has no sound. I’ve tried many of the suggestions on this page, & still to no avail. My model number is 42LD49 0-ZB. PRODUCT CODE: 42LD490-ZB.AEKDLJG. I have images of the inside of tv, now opened up Update (01/03/2020) Update (01/03/2020) is this close up enough. Please let me know. thanks @chestnuts204 post your images with your QUESTION. It is possible that this is a main board issue....
Chosen Solution Boots fine Login works Only loads to half bar Freezes I have tryed opening in recovery and changing password Still no luck Did you try running the onboard diagnostics (pressing the D Key) when the system is started? Reference: Mac startup key combinations See if that pop’s an error otherwise I’m sure you’ll need to visit the Apple Store to get this fixed.
Chosen Solution Hello, I build a pc with this main specs : Amd Ryzen 3 1200 Motherboard Gigabyte A320M-S2H Ram Corsair Vengeance LPX 8GB DDR4-2400MHz (CMK8GX4M1A2400C16) But when I assemble everything, the pc seems to work but there was no image on the screen. Then I add a GPU on the pc and the image was ok from the GPU. After 3 days I opened the PC and I have seen a blue screen and it was memory management....
Chosen Solution my phone is working on iTunes but the screen doesn’t altho it is not damaged i think the first connecter is damaged how can i check Do you have backlight? Try to see if you can see anything on the screen with some light
Chosen Solution Hello, good afternoon, I have a KitchenAid professional 5 plus mixer, it has no force, no torque, it turns on and the motor works, apparently normally, even the speeds, but if you take the hook with your hand it stops while the motor It still works, I checked the gears and they look good, they are not broken, what could be the problem? Thank you. https://youtube.com/shorts/R2vJlSOSzQM?f… https://youtube.com/shorts/R2vJlSOSzQM?f… mariosousajr if you double checked all the gears and shafts and those are all good and properly attached, then the next issue would be the motor itself....
