Chosen Solution I have a MacBook (Retina, 12-inch, Early 2015) for the last few weeks my screen has started to have problems. Now its got so bad that I can only get a clear screen when it is at an angle ie pulled forward. If I take the screen further back I get lines flickering across the screen..see attached video..sometimes its so bad that its unreadable..other times its not too bad...
Chosen Solution I left my Macbook in my backpack and I guess my water bottle somehow opened and managed to get my Macbook wet. At first I wasn’t getting any signs of life so I performed these steps on it to try to revive it: Dropped the logic board into an ultrasonic cleaner to clean off corrosion. Afterwards, I submerged the motherboard into 99% isopropyl alcohol to displace the water and left it to dry overnight *At this point, my Macbook is able to turn on but I notice that the fan kicks in at full speed and it’s unbearably slow I ran ASD on it and was able to get an “SMC IO Fail” error underneath TN1D....
Chosen Solution Hi, I’m looking to upgrade my iMac CPU from the standard 3.0GHz quad-core i5 processor it came with to an i7. I don’t have a budget for the top-of-the-range i7-770 one (the highest in the series) however I want one that is in budget that will make a good difference. What specific modules are compatible with this model of iMac? any that don’t have a ‘k’ at the end?...
Chosen Solution We were watching TV then al of the sudden this weird line showed up! And a spot that looks like something hit it. Nothing touched it!! @krcbdavis not exactly sure since we cannot see what you see. For that it would help if you post some images with your question. For that, use this guide. You also want to let us know what model your TV is. Right now, and going by your description alone, it does sound like a broken LCD....
Chosen Solution I lost this clasp see step 15 not sure what to do now? Wii U GamePad LCD Display Replacement The connector is on the board and the flat ribbon cable should just slide in. I’m not sure I understand the question. Did it break off the board?
Chosen Solution MacBook Air from a coworker had water spilled on it. It does not turn on when powered at all. But once I plugged it in. The cpu started to heat, and a small light had turned on the board. It is clicking but not doing anything. Is this a dying CPU or just a battery needing to be replaced? Rakiem Geschaklt, The first thing to do is to stop trying to charge and use it!...
Chosen Solution I was trying to use my TDK A33 today with my 2014 MacbookPro and the sound was being muffled. My computer was connecting to the bluetooth, but the telephone button was turning on and connecting at the same time and the sound was getting really distorted. I tried repairing with bluetooth and not the telephone, resetting the TDK bluetooth options, and tried restarting my MacbookPro, but nothing has worked so far....
Chosen Solution Hi, My Apple Watch is not switching on even after 2 hours of charging. When connected to the charger, it shows a green charging sign but it goes red as soon as it’s off the charger. Any thoughts? thanks! The first thing you should do to try and fix this issue is to press and hold the side button on your watch to see if the Apple Watch turns back on....
Chosen Solution I haven’t gotten quality speakers until a year later so the warrant just ended. I plugged in the aux cable for the first time and it doesn’t make any sound. It doesn’t really click in and instead just kinda sits there. It’s making a weak connection because the echo does recognize it’s connected if wiggled in the right position because it stops playing music at that moment. I think the aux port broke loose and needs to be repositioned or something similar....
Chosen Solution I have a samsung blue ray player and it changes sources automatically. ..the disc door opens by itself and closes… Hi @pbadwin36, If you have a Samsung BD C6900, here’s a link to the relevant section in the user manual that shows how to setup a WiFi connection. I have this player and the door kept opening and closing on its own. I disconnected the touch panel and that solved the problem....
Chosen Solution Hi i wanna ask what is the damaged component / ic because my 6s plus will freeze after screen locked and will not turn on or charging ( 0 amp ) and i should disconnect batterry and connect it again to turn it on beside that the phone work normally but i think there is some power leak cause the phone discharge fast and it seems not showing the true percentage of the battery cause everytime i reboot it will start from 80% and slowly reduce...
Chosen Solution My iPhone won’t turn on, the home button is broken and it rarely actually charges. I need help. I turn it off to go to sleep, next morning it won’t turn on. This happened before but my home button wasn’t broken. I tried putting it on charge overnight. Nothing! Please help. @nicace63 few things you want to do before trying to diagnose your phone. There seems to be a lot going on with it....
Chosen Solution My MX Revolution doesn’t have the screws under teh mouse pads — How do I open to clean. Can’t read the PID on the mouse suspect P/N 831735-0000. Definitely a DZL-M-RBQ124 CMII ID: 2006DJ1580. Has the original USB dongle, not the Universal from the later models: PID of Dongle is LZ64784 with a part # 831735-1000 dzmrbq124 … pid lz629bj
Chosen Solution Hello, my MacBook Pro late 2013 is turning off completely randomly, no matter how much charged is the battery, no matter if plugged in or running from battery. Sometimes it takes 2 hrs running, sometimes it runs whole day, sometimes 10 minutes. Usually turns off when I do something more power demanding, but sometimes not. I didn’t find really any pattern to this behavior, seems completely random. I have tried to reset SMC, PRAM, reinstall completely software (installed Catalina instead of Big Sur – in case if the older computer has problem with the newer system (as before Catalina worked perfectly fine and I had the feeling that Big Sur came with some smaller problems such as lowering battery capacity)....
Chosen Solution My MacBook won’t start it keeps loading to a certain point and then restarts Let’s try starting up in the onboard diagnostics, restart your system and press the D key. Did you get an error message? You can also try stating up under Safe Mode pressing the Shift (⇧) did that work? Reference: Mac startup key combinations
Chosen Solution My Philip tv when it’s get hot it’ll turned off and on. And went black Hi! This is because it try to protect itself from burning, verify the are it free pf something that cause overheating such as heaters, heater windows too close, clothes over the TV, or other things that cause overheating, relocate to a cooler place or room if possible to see if this works.
Chosen Solution My phone turns itself off and turns on again every two minutes or so, and I did a software and reset for it, and nothing worked. If the phone is completely powered off, make sure the phone is charged. Connect the phone to a charger and check the battery level. When the phone’s battery is low enough, the phone will turn off automatically. Regards, Will
Chosen Solution While on vacation in Tennessee, I was dropping the anchor, and while leaning over my phone jumped in the lake. The depth finder sensor was in the deepest part of the water as we were at the bank. Maybe 15ft at the max depth. This was not but 10-12ft. I found it after about 2 minutes. It has been fully operational. 100%, and I’m happy EXCEPT the moisture build up on the back of every darn camera lens....
Chosen Solution I plugged in my phone for 30 mins until i noticed that it was no longer charging. When i took off the charging cable, it smelled burnt. The charging port also smelled burnt. Im wondering if its the charging port or if i have to use the original htc cable to charge the phone ? I’ve got the same problem. My phone will only charge sometimes and the times that it doesn’t charge, it gets really hot and start to smell smoky....
Chosen Solution Hey everyone, I have a Craftsman LTS 1500 I’m trying to fix. It came with the house my friend bought, wasn’t running (except for a jump start) and I was in the mood for a little project anyway. So I got the engine to run, replaced the battery, replaced the spark plug, did an oil change and added fresh fuel. It ran for a little bit and after taking it for a spin, nearing the end of mowing the lawn it stopped moving....
