Posts

Chosen Solution I have a decent but off-brand blender by Anthter, which costs a pretty penny, and I have already received a replacement for my faulty device. However I don’t really want to toss my device that’s faulty, so I was hoping I could fix it and use it eventually. This occured on my 3rd use of the blender ever, trying to crush up some grain in it. I’m pretty certain I must have overheated it or busted something because in the middle of blending a bunch of grain, it stopped working suddenly....

Chosen Solution sometimes when i turn on my xbox the power light for the xbox starts to blink and says that its opening but is not. i press on the tray and it says closing the says opening again. now i took it apart there is no cover on it you can see everything and now it doesn’t do it anymore but when i put it back together it starts all over again....

Chosen Solution HI, i am using this hp pc with amd a4 for around 2 years never had a problem until this week yellow light became red and it blinks 4 times also the pc beeps 4 times tried everything noting works i asked about this problems in some fb groups someone told me to heat the board with a blow dryer i did and it worked but i have to do every single time is there a permanent solution for this or not kindly let me know...

Chosen Solution My phone fell on the floor and got scratched and now it doesn’t want to turn on and the screen is black but I can hear screenshots and notifications the screen is just back plz help plz I have seen this mostly on android phones. The internal lcd has been damaged. You can still damage it without cracking the glass. If you put the phone under a lamp or some type of light and rotate it a bit, youll probably see a black line or some type of imperfection that will indicate the lcd being damaged....

Chosen Solution I have the lastest iTunes but when I plug my phone it it tells me it isn’t the news one so I download it again and it keeps telling me it’s not the newest so it sticks me in a cycle. Idk how to get past it. -Plug in your device -fully power down your device. -Press and hold power button until you see the apple logo. -Without releasing the power button, Press and Hold the home button -Continue holding both buttons ontil the screen goes black -When the screen goes back, release the power button, but continue holding the home button....

Chosen Solution Keurig B70. Water leaking out the bottom. I removed the bottom plate and observe water inside the unit. Unable to dissemble further without knowledge This explains how to disassemble, but it’s completely unnecessary as you can access the pump seal which leaks by going through the bottom and just unscrew the pump screws to refit the gasket. See other posts on this site. bill sully, great instructions from here :“You will need to flip your unit on its side for the repair procedure....

Chosen Solution Tried several test. Checked Va and Vs is running as labelled. Therefore there should not be any fault with power supply board. Checked connection and fuse. Anyone can advise what does the these 4-5 times blink codes mean? Hi @kaito32, Here’s a image of the Protect mode troubleshooting flowchart taken from the TV’s service manual. There’s no information in the manual as to what the blink error codes mean so this may be as good a place to start as any....

Chosen Solution Hey, I bought a used keyboard and I realised that the arrow keys are not working properly. The left and up arrow keys work only if I press them stronger (the left one also works effortlessly if I press it on the left side of the key). Any clues on how to solve it? Should I try to disassemble it and clean it or what? Thanks in advance for your assistance....

Chosen Solution I have a Macbook Pro, serial ending in F5WV, that was purchased refurb from apple for a employee to use. It last about 6 months until it was brought back to me for having no display. I did some digging and I have come to the conclusion that the backlight is the issue. -I can do the flashlight trick and see my apple logo and users etc….. -I can hook it to an external monitor and have it work perfect....

Chosen Solution My dad was attempting to replace some of the plastic feet on the computer when he accidentally stabbed with a steak knife the inside of the computer hitting the lvds cable or the port that it connects to, he is uncertain what it hit. I am uncertain that if I purchase a new lvds cable and replace it, it will not fix the display because the damaged part is the connector and not the cable and I will be out 35$....

Chosen Solution Got this laptop July 2020, had a beer spill in March 2021 resulting in a keyboard replacement (functioned perfectly after keyboard got replaced) and then one day I just started getting this issue, laptop works flawless while on charge but once charger is removed, it shuts off with no sign of life. SMC reset did not work, took it to a repair shop and they said it’s a motherboard issue and will cost $250 (don’t believe that it is a motherboard issue after this coconut battery result):...

Chosen Solution I hope find some help around Redditors who know things way better than me. Long Short story I try to pry open my Retina Display Macbook Pro 13" from early 2015 if I’m not mistaken to make sure is it SATA / M.2 NVME SSD inside and turns out Apple put out their proprietary standards as usual. Then I close it up, but everything back into where it suppose to be but when I try to turn it on it won’t turn on like usual....

Chosen Solution While grinding meat using the grinder attachment, the sound of the motor has changed and then the grinder stops. I suspect it needs to be cleaned. What is the recommended method and materials to do this? While the change in motor noise is most likely a motor fault, do examine the grinder itself. If the front ring is too tight, the mixer will grind (pun alert) to a halt....

Chosen Solution I have the replacement screen for the motorola 6 G play it is only a crackled screen it still works, can you fix this model having a hard time getting fixed hi, yes you can, please see link below. https://www.youtube.com/watch?v=tZqRAlzs…

Chosen Solution Hi there, my MX Vertical isn’t moving the cursor anymore.. However, the buttons still work (e.g., left/right click, wheel, fwd/back, etc.). Does anyone know of a way to repair this? Is the optical sensor easy to replace? Could this perhaps just come loose? Any experience with this issue would be greatly appreciated as I haven’t seen anything pertaining to this particular mouse. TIA Found this video, it’s in Vietnamese but it helped me open the mouse and fix that cursor issue....

Chosen Solution When I push the power button, I see the fans start for a very brief moment, then stop. After which, a few seconds pass and it repeats the same thing again and again!! So I tried changing ram sticks and also the power supply. Hmm. It looks like there might be a problem with the motherboard. If you’re experienced with fixing those things you might try having a look at the board with a thermal camera, particularly the power supply sections to see if there’s anything getting warm?...

Chosen Solution My computer is an HP and when I turn it on it goes to the sign in screen, as usual, but when I try a log in it gives the normal loading screen than blacks out. I can sometimes see and move the little pointer. I’m useless at computers, please help! @nerdyhuman “log in it gives the normal loading screen than blacks out. I can sometimes see and move the little pointer” sounds like a settings/driver issue....

Chosen Solution My iPhone 5c kept saying “This accessory may not be supported”. I knew what the problem was, I had to get a different charger. I kept putting it off and off. This morning it kept doing it and doing it , more than usual. When i was closing my apps it said it twice in about 0.2 seconds. I tried to press dismiss but it wouldn’t work. I shut my phone off and tried to do it, and it wouldn’t work....

Chosen Solution Ok so I left for this morning and left my laptop on hoping it would go to sleep it did now it’s not turning on what do I do this laptop is just problem upon problem p.s it was connected to monitor and was left on charge try a multimeter and see if there is voltage coming from the charger and the battery port. If there is no voltage from either you battery needs replacing or your charger needs replacing

Chosen Solution this lines see on blue background, no problem another color background. This is a sign of a messed up LCD panel with the column driver logic on the faint columns. Either you had a liquid spill on the display which is effecting the driver logic or the LCD panel was bad from the factory. Given the age of the system I don’t think Apple will replace the screen under warranty so that leaves you with a choice of fixing it on your own with a new screen or having someone with the skills do it for you....