Chosen Solution Hi. Ok, now I know my question isn’t exactly related to fixing things etc but I would love some help. Long story short, I use an iphone 4 and my media almost nearly got full and I NEEDED to free up some space. Now I have a usb and all but still I couldn’t move the pictures (the problem is that I have 2500+ pictures and that’s what takes so much space or else I have 3 and ONLY 3 apps!...
Chosen Solution I checked to make sure that there wasn’t anything wrong with the battery and found that it is the correct battery. However, the device will not charge even when it’s plugged in. The charger could have a malfunctioning cord. Check to see if there are any tears within the wire. Sometimes there are rips where the plug is located. If this is the case, a new charger will be needed....
Chosen Solution I recently found my old gameboy advance sp that I have had since 2005. I bought a charger for it but when I plugged it in the GBA the charging light flashes for a second then turns off. After a lot of googling I figured it was a battery problem so I bought a battery replacement for the GBA but, it’s still doing the same thing. I have no idea what to do now and really need help....
Chosen Solution Screen just stays blank There may be a problem with the screen, or the charger cable, or the charging port. Try a new charger cable and make sure your cigarette lighter fuse is not blown.
Chosen Solution The tv turns on for a second and the picture dissolves, backlight and sound remain. What component should I replace? Tcon or mainboard. Is it something more serious like a panel issue? Video of it: https://youtu.be/ooredd1iFs4 Hi @zac827 , What is the model number of the TV? It doesn’t appear to be a tcon problem as the logo shows up OK. the tcon translates the video signals between the mainboard and the panel....
Chosen Solution After installing a new SSD I’m stuck on the question mark and unable to boot up. Try to hold [alt] while you start the imac and you should see your system. If that was the Problem: Boot it up and go to the System Preferences->Startup Disk and choose your system as the Startup Disk. If Spaeder’s answer does not work your drive likely has become corrupted or has failed....
Chosen Solution i have charged my iPhone six on DC , after that not it take charge not turn on,, please provide me the proper guideline thanks Verify you are using a working cable and charger. then make sure charging port is not clogged with debris, clean it out. Try charging again… If it does not work after cleaning and using known good charger and cable, verify you have a good battery and the charging port is not damaged....
Chosen Solution Hi, my MBP doesn’t show anything when pushing on the power button: no boot, no light, nothing. Only the green light appears on the charging plug, but nothing on the MBP itself. What should I do? Thank you for your help. Arnaud Try holding the power button down for over 10 Seconds. If this answer is acceptable please remember to return and mark it.
Chosen Solution I have this problem too but I have a iPhone 7 it’s really annoying now it try’s to download like 98 app at once I just delete like 100 There is a virus Is there an app that you. Downloaded right before this happened
Chosen Solution I spilled a bit of water on my computer and ever since everything has been working fine, except I can only use my computer when it’s plugged in. The battery icon at the top says 100% and the light on the magsafe is green. I ran a battery diagnostic and it says everything is working fine. If I’m using the computer and the cord comes unplugged it just shuts off....
Chosen Solution MagSafe charger still lights up green first and then turns orange when plugged in, but after 24 hours of constant charging, it still stays orange. I’ve done all the simple things (resetting SMC) and others, but I’ve come to my last resort. Do you have a solution? Disconnect the battery following this guide to Step 6 MacBook Pro 13" Retina Display Late 2013 Battery Replacement. Then with nothing connected hold the power button for a good 15 secs....
Chosen Solution Hello, I was recently replacing the screen on a 7th generation iPad model A2197. However, the flex cable connecting the LCD to the board broke at the LCD end. I purchased a new cable, however, the LCD connector was basically melted onto the copper and I had to remove it with a small wire brush which may have damaged the connector beyond repair as it’s not functioning, no action on the LCD at all....
Chosen Solution I want to upgrade my LCD to OLED for my iPod classic. Would that be possible? Simply put No The circuitry is very different between a LCD and OLED systems. @gman13579 no. You would need a screen that is “wired” for your iPod since there are no standard connections. There are no manufactured OLED screens out for an iPod.
Chosen Solution toshiba 50l711u18 back light turns off after 5-9 minutes of use. I can see picture with flashlight. I can’t see any light from air vents when black screen. I have factory reset. Unplugged for 10 min. Nothing seems to help. Would this be a board or led issue Does the red light by the power button give you a code by flashing a certain number of times? It sounds like you’ll need a replacement board....
Chosen Solution LG model - 43UK630PPE Every 15 minutes or so the screen turns grey. Can still hear the program but cannot see. To fix required to turn tv off and back on. Good for another 15 minutes or so then back to grey vertical bars. Suggestions as to how to fix appreciated. @david_ph1 intermittent errors like the one you are describing are a big PITA :-). The issue here could be the T-con board or the Main board....
Chosen Solution Hi, I have an LG TV 65UM7300AUE and it won’t turn on. There is no red light on the IR sensor and I’ve followed all the basic troubleshooting. After that I have been buying parts from ebay, trying each one to see if it fixes the issue. I tried replacing the power supply board, main video board, IR button and sensor, IR/WIFI cable and lastly the power supply board to main video board power cable and it’s still not turning on....
Chosen Solution I have a Schwinn 26” Frontier with a loose crank. I tried tightening it and the crank is still loose but now my bearings make a loud squealing sound every five or six turns. How do I fix it? What exactly did you tighten? The crank bolt that fastens the crank to the axle? Or, the bottom bracket itself? Is the crank loose, or is it the bottom bracket?...
Chosen Solution Hey guys. I bought a Mac air on a whim and it turns out its (maybe?) broken. Pressing the power button will give me the apple boot sound, and the mobo fan spins, but the screen remains black and the apple on the back does not light up. The caps lock light lights up too. After taking it apart, I realized the SSD was missing. I’ve tried all the sorts of resets there are, and nothing is changing the situation....
Chosen Solution Hey everyone, I have a dead MacBook Air I’m trying to troubleshoot. It’s not turning on whatsoever. The MagSafe LED turns Green for 2 seconds then goes to Orange when I plug it in. After reseting the SMC it does the same thing. I’ve check the inside. It seems there is traces of melted plastic on the battery (see pics) above some electrical part, not the lithium blocks. I’ve tried starting the system with the battery unplugged with no luck....
Chosen Solution Hi guys, My MacBook Air mid 2013 started freezing and shutting off. I rebooted, reset all SMC, PRV… nothing worked. I then erased everything and reinstalled the original OS (Snow Leopard). It didn’t help. I then removed the battery and connect it only in energy. This worked and I assumed the battery was too old and I installed a brand new one. To my surprise, now with the new battery and new OS (upgraded to high sierra) it keeps freezing and shutting down....
