Chosen Solution My lg ms345 stays at the no command screen here is what i did 1.# I tried to update my phone 2.# It said error so i took out the battery 3.#Every time I turn on my phone it doesnt fully turn on it just stays at the no command screen. How to fix this anyone help rebootreboot2 try these
Chosen Solution Help! I have this game that only works with headphones with a microphone. So I tried a variety of different earbuds and headphones and none of the microphones work on my phone. The microphone on my phone without headphones in is perfectly fine by itself, but doesn t work for the game. I am able to hear through both ears on most of the headphones and earphones I tried....
Chosen Solution After leaving my Pro Controller charging for more than an Hour it will not turn on or charge. Holding down the Sync button also does not work Needs a new battery it seems like. Very easy to replace, all you need is a pretty tiny Phillips head screwdriver. Screw off the screws on the bottom of the black grips, then those 4 screws on the inside. You should be able to pop the backplate off and have access to the battery....
Chosen Solution My phone oppo f1s touch screen suddenly stop responding. What can I do? My Oppo f1s suddenly atomaticly answered in my pocket during ringing.. Pls advise.. Tq
Chosen Solution I have Nikon D80 which I have some how managed to brake its lens. The auto focus does not work on the the len. I had a question that is it fixable. Please reply back at darrmanvar@yahoo.com Thank You. There are two auto/manual focus switches that both have to be on. The one on the lens and the one on the lower left front of the camera next to where the lens plugs into the camera....
Chosen Solution I purchased a Nikon D7200 (almost identical to 7100) from a guy on Craigslist and he said it had a sensor scratch, after looking at photos of sensor scratches I don’t think that is what it has. When taking photos in daylight at low F stop a light spot appears in the photos. I have tried switching lenses with no change, as the f stop gets higher the spot goes away....
Chosen Solution There is “Lock” sign appeared on the screen and the control wheel does not work, which means I can’t change wb, iso, or metering. It never happened before. Joohee Lee from the owners manual “●When the cursor button is locked, operation of the cursor button, [MENU/SET] button, and control dial is disabled. To enable operation, press the function button again.” you can download the user manual from here
Chosen Solution I smashed the internal lens of my go pro session 4. I have taken it apart and don’t know where to purchase the lens assembly. I figured the lens assembly and sensor will need to be purchased together because the lens is glued into the assembly probably for focusing. I was able to get it screwed out but figure there will be no way to refocus it with a new replacement…....
Chosen Solution As per the Subject line, I am looking for a Touchscreen for an Acer CB5-312T-K1TR series, Model No. N16Q10, I’ve looked at the site but although there are CB5-312T models mentioned, they are for -K8Z9, -C1LK & -C8ZW and I have no idea if these are compatible with this -K1TR … does anybody know what the last 4 digits specify ? I am in the UK and need to source this unit (I am led to believe that the screen, touchscreen & bezel, though there doesn’t appear to be one, the glass goes all the way to the lid !...
Chosen Solution When I turn on my Mac mini my fan starts for 2 seconds and turns off and sometimes when I hit the power button unplug it and keep holding it and plug it back in the fan gets very loud and doesn’t display???? Not good your Radeon HD 6630M GPU has failed! This was a common issue in this series Macmini5,2. The Macmini5,1 and Macmini5,3 both use the Intel CPU HD Graphics 3000 and don’t have this issue....
Chosen Solution MBA only charges sometimes and when it does it’s only for short periods of time. However when it doesn’t charge it won’t even turn on. When it doesn’t charge there is no light on the charger however it is a working charger. I have tried cleaning the charging port, even swapped charging ports, to no avail. What could be causing this and how can I fix it? Also: The same macbook is not reading my SSD....
Chosen Solution I replaced the battery in my 2010 UNibody 15" Macbook pro. The replacement battery has fully charged, but the computer won’t fun off of the battery. When it’s plugged in, the batter indicator lights as well as apps like Battery Monitor show a full charge and perfect battery health. However, as soon as I unplug the power cable, the computer shuts down, just as if i didn’t have a battery in the machine....
Chosen Solution My MB Pro Retina late 2012 served me very well for the last couple of years, until the battery was virtually dead and I replaced it with an iFixit battery. After the replacement, I calibrated the battery as suggested from iFixit and everything was working well for the first cycle of the battery. I erased the hard drive, installed Snow Leopard, updated to El Capitan and eventually updated to Catalina 10....
Chosen Solution Hi, I’ve got a water-damaged 2012 15" Macbook Pro Retina. It doesn’t do anything when you try and power it on, but it does seem to accept charge when you plug the magsafe charger in, as the orange light comes on. I’ve seen replacement logic boards on ebay and tempted to try and fix it. Does anyone have any advice before I buy the replacement board? I dont want to spend £350+ on a logic board in case it doesnt fix the problem, or somehow damage the new board when re-powering up the laptop....
Chosen Solution just installed the mobdro update and now can only receive sound no pictures.the old version worked fine.any ideas? Hi, I had the same problem but haven’t found any solution. I just downgraded to the previous version and works well now.
Chosen Solution I have a circle with a line through it where there should be cellular signal strength. Have tried all the “ususal suspects”, multiple network resets, wifi calling is off, reset phone to factory defaults and even full factory reset and reload software. Tried multiple sim cards, all of which work in other phones. Phone is now apart…..all parts look in tact and fully functional. Phone seems to recognize when I install a sim card, but never gives a connection to a network....
Chosen Solution Is the Cambio 10.1 2-in-1 the same as the Cambio w101 or the rct6203w46. I need to replace the digitizer and these are the models given. @iamsam22 let’s focus on which one you have. Cambio 10.1 2-in-1? Any model numbers on the back etc? this should be model number W101 V2. You do want to try and purchase the digitizer from a place that will take returns, just in case....
Chosen Solution I just recently assembled a brand new PC. I triple checked to make sure that everything was plugged in correctly. I connected my monitor to my PC and nothing happened, the monitor screen said “No Signal” so I changed the connections. Both my monitor and PC have DVI and VGA connections (btw I connected it to the motherboard), so when the VGA (the first one I tried) didn’t work, I switched it to DVI, which still didn’t work....
Chosen Solution After I shutdown my laptop, I turn it on a while later and it powers on but then goes off after 10 seconds and doesn’t show anything on the screen. No sounds or anything only the fan spins. The lights work perfectly and the motherboard receives power. So why, after all my good deeds, why is this happening to me. Please help me someone so that I may work on my unreal engine again....
Chosen Solution Whenever I turn on my 3DS, a bit of text pops up saying “Could not detect an SD Card. The software on the SD Card could not be displayed.” It has been this way for a while now, but I still don’t know what to do. I took it to a computer repair shop and the guy said that it’s a problem with the motherboard. In what file system is the SD card formatted?...
