Chosen Solution I recently got a PAL SNES from a car boot sale and can’t seem to get it to work. The console powers up but will not go beyond the title screen for any of the games I have tried. I’ve taken it apart and can’t see any obvious damage anywhere. I cleaned the cartridge slot with isopropyl alcohol, hoping for some tips on what to check next before biting the bullet and getting another console....
Chosen Solution Locked out can’t remember I’d or password Hello Nate! The only way to bypass your Windows password (that I know of) is by using a tool called “Konboot”. You need to buy a license if your Windows version is new than XP. The program is installed on a USB stick. Once it is installed, you boot from the USB stick and Konboot will do its magic and take you straight to Windows where you can put anything in the password field and it will work....
Chosen Solution Hello, I have this machine (early 2011). I bought it for parts for really cheap. There is no way to repair it though. When I disassembled it the board looked a bit odd. It appeared someone BRIDGED resistors. At this point, I was really disappointed. I started searching for replacement boards, but they are really expensive. And there are GPU issues… So I opted for the 2010 logic board because it has little to no GPU issues....
Chosen Solution mmm … Lets backup here a bit, You replaced the battery but you likely didn’t fully clean the surfaces of the old glue. Similar to how a suction cup works the surface needs to be smooth and clean. I use Goof Off you’ll also need to clean the area again with 85% or better isopropyl alcohol to clean off the residue. To fix this you’ll need to removed the battery and clean the surfaces....
Chosen Solution i baught a lumia 535 4 days ago. i have updated it today and then installing application. when an app was installing, my phone is turned of, and i remember that have only 6% battery. when i pluged in charger. phone not charge and not turned on again. many ways for soft and hard reset tested but not respond. i charge battery with other device but again not turned on....
Chosen Solution I replaced the original battery with an iFixit long lasting battery and after one year the battery will not hold charge for too long. The battery cicle is only 401 and it is normal condition. Any thoughts? Turn the device off. Once it is fully off, hold the power button. You should see the power light and caps lock flash on and off. This is a static discharge of the system....
Chosen Solution Hi, I have a MacBook Air 13’ Mid 2012, but I used it very little. But in the last years, when I turn it on, the Mac freeze and then 1 minute it reboot automatically. In that minute, everything doesn’t answer to keyboard or trackpad. And the more I turn it on, it first freezes. But a few days later it works normally, and after start again with problems....
Chosen Solution Why is it not pouring the coffee after it heats up? you could have a clog in the tip needle where the coffee goes check that first.. unfold a paperclip and stick it in to the needle then try it again. you may need to dig a little if there is a lot in there
Chosen Solution Same here. Late 2008 Macbook. I can only charge in Sleep mode, but if I leave the charger attached, Macbook will shut down within a couple of minutes. Can only charge in sleep mode to avoid blinking green lights. Must remove magsafe to run laptop. Install this app: CoconutBattery paste a snapshot of the main screen with the MagSafe charger plugged in and one without here so we can see whats up....
Chosen Solution My CV1 gets very hot on the top after about 20 mins of use. I had a DK1 and DK2 and I never had this problem. I thought I was just being sensitive to this but when people try my rift after about 15 or 20 mins they take it off and usually exclaim “Woooahhhhhhh” Not like that was the coolest thing I’ve ever seen but like i’m taking off a gas mask after wearing it in the Missouri summer for 30 minutes....
Chosen Solution I bought a new battery for my Nexus7 (2012 Wifi) and successfully replaced with it. However, length of time that I can operate is only 3 to 4 hours, which is the same as the old battery before replacement. I claimed the seller about it and a new battery is supplied from the seller. But the next one also allowed operation of only 3 hours. According to seller, it may be due to the Nexus7 remember the output pattern of the old battery....
Chosen Solution Bought an S6 today, im not as well versed with Samsungs. During calls, other party cant hear me, like theres a mic failure. Mic functions fine during voice recording, etc. Any clue? Do you have a bluetooth device connected?
Chosen Solution My samsung microwave heats food, but the turntable won’t spin and the light won’t come on. I’ve already replaced the turntable motor, but that didn’t fix it. Both the light and turntable stopped working at the same time. Hi @hitenmehta84, I’m assuming that the model number is ME16K3000AS/AA. It seems as though there may be a problem with the control board, given that the light and the turntable both don’t work....
Chosen Solution My dad is looking for a part for his GE washing machine and his repairman told him he couldn’t get the part since the model number and serial number are missing from the machine. I find this hard to believe. Does anyone know another way of finding the model number/serial number? Update (09/03/2016) Thank you. The machine is 6-7 years old. For top loader-the model/serial number may be found in the following places: 1 under lid, near the right hinge 2 exterior,on the back of the control panel 3 exterior front,bottom left corner 4 exterior back, near the water inlets...
Chosen Solution So far have replaced with new electrical module where all components are fitted together like speed control dial and capacitors and problem not solved, mixer it self have only three electrical components the main module and speed sensor and the corpse open sensor, there should be easy fix otherwise the motor is defective but is running continuesly at low speed so difficult to say is defective. SOLVED UPDATE Problem was the speed control sensor located above on the motor with three cables, never thought such tiny part make the stand mixer defective....
Chosen Solution Where can I order the speaker for the monitor? Thank you Hi, Have you actually proved that the speaker is the problem, i.e. does it test OL (open circuit) when tested with an Ohmmeter? If the speaker is faulty, looking at images in the ifixit Infant Optics DXR-8 Speaker Replacement guide, the monitor speaker is an 8Ω 0.5W mini speaker. I don’t know the actual dimensions so to get a suitable replacement, search online for (insert diameter of speaker) 8Ω 0....
Chosen Solution Market App on my HTC Incredible won’t work. Is there a fix for this? Hi @drmoe , You may have to buy a new phone if you want the current version of the Market App to work. According to this link the Market App, (if this is the one that you mean), requires the phone’s OS to be Android v5.0 or higher, for it to work. (scroll down the webpage to view the Additional Information section) According to this link the OS installed in a HTC Incredible 2 is Android v2....
Chosen Solution It says error: memory. I can’t get out of it and can’t connect my calculator to any device. What do I do? Try, with a skinny object like a bent paper clip, on the back there should be a little reset button. With the paperclip, push that button. It should say on the screen: “Ram cleared” or something like that. Hope I could help!
Chosen Solution It’s fully charged I’ve replaced the batteries three times with brand new batteries and there’s a brand new SD card in it but it will not turn on. yes i have done all of those things. but it will still not turn on.
Chosen Solution my charging soket legs are dislocating ammo omar, disassemble your Ideatab. Here is a great video that will help you with that. Then unsolder the old connector and replace with a new one from places like this and many others.
