Chosen Solution My watch is A1553 with 38mm case. The back cover on the battery fell out and I need a replacement. Otherwise, the watch has been working fine but no longer chargeable. While the external cover @oldturkey03 has pointed you to will be needed, there’s a bit more! All I see is the bottom side of the S1 SIP unit you appear to be missing the charging coil unit and the photo sensor unit....
Chosen Solution The power cabel is conected to my Macbook pro and plugged in. The charge light does not come on. My Macbook pro doesnt want to switch on. First let’s see if the mag-safe is powered. Use a multimeter and test the output of the pins. The pin out is on the right of this wiki: https://en.wikipedia.org/wiki/MagSafe It is most likely an issue with either the battery or your charger....
Chosen Solution The temps dont seem accurate as they are the the only ones that are that high and the computer is not warm at all. The fans run at full speed and the computer is running very slow. Computer has no water damage. Also the computer will not go to sleep when the lid is closed. All I’ve done to the computer is replace the hard drive and upgraded the memory....
Chosen Solution Monitor: Acer XV240YThe monitor was fine when first bought, the max it can run on original spec was 165hz but then slowly, the monitor appeared to have a weird horizontal glitching lines similar to this (refer to the link) MSI Optix MAG24C Horizontal Lines I never did anything to the monitor before, it just starts getting more and more glitchier so I had to switch down to lower refresh rate which were 144HZ but then after some times the thing happend and I kept switching down till 85HZ which I am still at rn and it stopped at 85HZ....
Chosen Solution I have one bad motor/servo in Grubby I repaired the other two but the third one will not work This is a similar motor and may work for your 1986 WOW Grubby: https://www.amazon.com/Carrier-Replaceme…
Chosen Solution I recently bought a TedGem mouse and it worked for a month and now it doesn’t move the cursor but can click and scroll. I’ve tried deleting the HID-Compliant mouse from the device manager but it didn’t work. @chilledlava had you press other buttons to test on the dpi? Is it still under warranty? If so, send in for replacement. not sure if your light sensor is using infrared or LED if LED check if there are lights....
Chosen Solution Every time I open my camera, whenever it’s in Snapchat Facebook or just the normal camera app, the screen is filled with 9 different color stripes, you can’t see anything else. The colored stripes are(from top to bottom) Gray, White, Yellow, Blue, Green, Pink, Red, Purple and Black Did u ever fix this problem???
Chosen Solution Charging slot is loose,the charger doesn’t fit in properly and it is not charging my device,how to fix it? If still under warranty, seek a warranty repair. This sounds like your power connector / usb has been damaged, since on this model it is soldered to the main board it will need to be resoldered, replaced or possibly worse depending on what exactly is damaged. If it is only the charging port you may wish to try a repair yourself, the iphone repair kit sold by ifixit will provide most of the needed tools for opening and exploring but this is not an easy repair, unless you have experience with soldering verysmall connections....
Chosen Solution I was connecting to a bluetooth speaker the other night and after it connected, the tablet just shut off. It was connecting normally for the past two weeks. And now it won’t restart, charge, soft reset or hard reset. This Can be very easy to repair if it was not broken and impossible if the motherboard is broken : 1.Parts inside any smartphone or tablet are connected by a lego style electrical connectors they can get unplugged easily by a drop 2....
Chosen Solution I dropped my galaxy s6! the crack isnt bad or much just a hairline crack in the bottom part. Can the front lens and lcd be separated for a quick fix? It’s difficult and at the risk of damaging the screen. So either take it for professional repair or leave it alone if the screen still can work normally. To answer your question, Yes it is possible. I have a Shop in San Jose, CA and I have done the glass repair a couple of times....
Chosen Solution Whenever I try using the F5 and F6 keys to adjust the brightness, I can see on my screen that the brightness is being adjusted but the backlight doesn’t come on. You may notice that the keyboard backlight may not allow adjusting with a small prohibition icon being shown in the adjustment window. This is because there is a setting in MacOS (on newer versions like High Sierra and Mojave) that is switched on to automatically turn off keyboard backlight in rooms that have bright lighting (There is a ambient light sensor for auto brightness right next to the webcam) That setting can be toggled off under keyboard or power on System Preferences....
Chosen Solution When I was using my headphones for several days , it got loose from the left and right junction so I always had to use it while twisting it in different angles so that it worked. But yesterday when i was twisting , it suddenly came out from the splitter and i don’t know how to open it. It does not have screws or anything. Sorry for bad english...
Chosen Solution My left shift key not functioning and was advised to replace uppercase. Can you guide me to solution? Here is the IFIXIT guide to replace the uppercase: MacBook Pro 13" Retina Display Mid 2014 Upper Case Replacement. Replacing the complete case may not be needed! You can replace the keyboard alone if you’ve got the patience. You still need to follow the same guide just instead continue to remove the keyboard following this video How to replace keyboard in a MacBook Pro A1502....
Chosen Solution How can I tell if my motor is burned out I’m guessing you’re asking about a ceiling fan. Could be wrong. But to check it you need a multimeter. Do a continuity check from N to ground, and from each winding. Then to a continuity check across each speed to N. If I remember correctly the slower the speed, the higher the resistance. If it shows continuity to ground then it’s toast....
Chosen Solution I was trying to play my PlayStation VR today. My one move controller has a strange issue. When I log into Rec Room, both move controllers work as they should. About 2 or 3 minutes in, the light on the one controller goes out, meaning I lose all tracking on it, and my in-game hand just spins in place. The controller is still on however and all buttons work as they should....
Chosen Solution Hello, i got new battery from you guys and i tried to charger it it showed me sign of high temperature, please help. Thanks. common problem with a failing battery i had this issue i put my phone when it got hot in the freezer for like 2 .ins and then try also try different charger and port
Chosen Solution old peavy amp.. knobs crackle and pop The pots (potentiometers) are dirty. Get a can of deox it or other electronics cleaner. Unplug amp! Get inside of amp and check on the back side of pots. If there is a small hole spray some cleaner in there and rotate knob back and forth frpm 0 -10 several times. If there is no hole, Remove knobs and spray down the shaft in the front give it a minute to get down in there then rotate knob several times....
Chosen Solution Hi, Can I use a USB from my Toshiba LAptop to a USB socket at the back of my Television? MAny Thanks I’m afraid not. USB itself isn’t a video/audio port. You’d need to connect with something like HDMI, or a VGA lead and audio cable. The USB port on your TV is likely for something like direct video file/photo file playback.
Chosen Solution Hi, I replaced my screen on my iPad mini yesterday, and this morning I noticed lots of dust/lint, so I opened it back up again and used a microfiber to clean the LCD and also the underside of the touch screen itself. And some how after I closed the lid, the screen got really JUMPY! I thought I might have messed up the copper wiring when I was cleaning the underside of the touch screen but I checked and it looks fine....
Chosen Solution LG 3D TV 47LM4700-UE Continuous Input Scrolling. After a recent close lightning strike my 3D TV (LG 47LM4700-UE) has a strange problem where the input keeps constantly flashing /switching from one to another at high speed. So obviously I can’t watch the TV as the input keeps changing. Ive tried unplugging it, took batteries out of remote/ replaced. Nothing works. I assume this is the main board? If it is, how hard is it to replace?...
