Posts

Chosen Solution I’m not entirely sure if this has been on another forum but I’ll be putting it here just in case. I have a MBP mid 2012. It was running on Yosemite when I finally decided to upgrade it to Sierra but after my upgrade, the mouse pad and keyboard suddenly stopped working. The power key was working and the only time that the mouse pad and KB are working is when the MBP is on Internet Recovery....

Chosen Solution Hi all i got issue with Mac Pro 4.1 upgraded to 5.1 , 2 x 3.33ghz 96g ram gtx285 problem is Mac turns on fan spin I can hear hard start spinning, graphic card fans spin But nothing on screen and No light on keyboard problems started after I tried to clean the keyboard and Mac was off but keyboard was connected to front panel I changed front panel , I changed power supply When I press Diag all led on motherboard is green except 5V STBY which is yellow I don’t know what else to do I have tried to reset power management on motherboard as I don’t get any light on keyboard I have done most thing on user manual, again I have changed PSU I have clean and brushed motherboard to make sure nothing extra on board...

Chosen Solution I switched +ve and -ve into my Mac by mistake when fixing a charger (I know, I know). I’ve replaced the DC in board which had a blown component. Now it will only charge with an official apple charger if when I plug the charger in the battery is plugged in AND completely dead. I took it to a repair shop and their unbranded charger charges it happily… Any ideas what I can test?...

Chosen Solution I recently spilt coffee on my MacBook trackpad, quickly tried to wipe it off but some of it seemed to have seeped through. Everything works properly, I haven’t had any issue with the MacBook except for the click. The trackpad doesn’t seem to click anymore. I took it to apple and they said I have to replace the whole logic board and the trackpad, and that it would cost me about $1299 which doesn’t make sense....

Chosen Solution My macbook pro keeps having this issue of randomly cutting off and then booting back up after like 3 - 5 days like nothing happened. I fitted a new battery and didn’t fix the problemTried all key commands, PRAM, ect. You name it i’ve tried it, nothing has been successfulremoved the battery wait 30 seconds and plugged it back in and still didn’t workTried using just the magsafe connected without the battery to turn on and still didn’t worki’m not sure if it’s logic board issue but I’m not willing to pay £400 for new logic board and when i can just buy myself a new macbook....

Chosen Solution I swapped my housing everything worked fine except the bottom speaker (Not the earpiece) i have swapped the speaker out but it won’t work i can provide photos if necessary please help Did this housing already come with the charge port or did you transfer the charge port?

Chosen Solution The phone works perfectly though I have one issue. When I make a call I only hear the other persons voice if the phone is on loud speaker this is because the tiny speaker on the top of the screen does not work, I don’t know if its a software or hardware issue. Since you can still hear the other person when using speaker phone, chances are it isn’t a simple volume error....

Chosen Solution after I replaced the screen of my macbook the microphone stoped working I have checked all conectors and nothing. can anyone help me?? Sounds like the ribbon cable got damaged somehow. Here’s the needed part MacBook Pro 15" Microphone (16/17/18) apple P/N 821-00615. You’ll need to lift the logic board to get to the part out. Cable connection on logic board: And here’s the cable after the logic board is lifted off:

Chosen Solution Recently my display started doing this. It’s not software nor cables, since it’s the same unplugged from a computer. When I turn off for a moment and turn back on it works fine, and after like 30 seconds it starts whitening until it’s like the picture any ideas? Robson that looks like a failing panel. It is possible but a bit unlikely that this is a capacitor issue on your board....

Chosen Solution Using a tripod and timer my pictures are still not as clear as they were in the viewer Thats because of the light. Cameras are quite different from your eye. Ive tried to take a beautiful picture of the moon but my eye could see it fine but my camera took really fuzzy images. With your camera there could be 2 things. One is the focus the other is the light....

Chosen Solution When i cali i don’t get green light i just get fast red and orange flashing meaning failed plus i can’t take flight i just get red flashing lights can somebody help me please ? regards Clarke Connect Phantom Assistant and check battery status or any problem. http://wiki.dji.com/en/index.php/Phantom… https://www.flickr.com/photos/jgustavoam…

Chosen Solution I’ve replaced the battery and ignition switch. The mower will not start when the key is turned to the start position. However, with the ignition switch in the on position, I can jump across the terminals on the starter and the mower will crank. This problem is intermittent. When this occurs, the mower will not shut off when the ignition switch is turned to the off position. I suspect a relay, however, I don’t know where to look....

Chosen Solution I heard a squealing sound in my rear back of my car a month ago. I immediately took it to a dealer and found that my rear passenger side brake shoes need to be replaced. They gave me a higher quote so I took it to a nearby mechanic store and they did a diagnostic brake check for $35 and found that my rear brake drum needs to be replaced and adjusted and they took $240....

Chosen Solution I recently bought the HP Flyer Red laptop and it has been working great for about a month until I cut the camera on and it suddenly turned off 2 days ago and won’t turn back on. I tried charging it and taking the battery pack off. It came on for a split second and turned back off. I tried it again today while charging it and it came on but went to a dark gray screen with just the mouse pointer showing....

Chosen Solution My ds is fairly old and it hasn’t been charged in years. I tried charging it again but the orange light won’t even show. My charger is new but nothing happens. This could either be a Battery issue; replace the batteryCharge port issue; replace the motherboard (the charge port is soldered to the mobo and unless you have good microsoldering skills I don’t advise replacing just the port)Faulty EM10 power supply filter; repair or replace the motherboard, this requires soldering skills if you wish to repair your mobo....

Chosen Solution The CL child lock code appears I tried releasing it by holding the child lock preference button for 3 to 5 seconds several times but it won’t turn off any other suggestions on what it could be thank you Gary Try unplugging the machine for 5 minutes to allow it to reset. Here’s the info I found on the Child Lock: https://www.lg.com/us/support/video-tuto… Hi @Dina Flower Here’s an image from p....

Chosen Solution Hey guys i got htc desire 830(not 820, 830!) and its really hard to find answers about my phone, like its a fake version but its not, btw, after 1 year of using, its turning off by itself, all same applications as before, also tried some methods like disabling all 3rd party applications, and i did hard reset, still happens, i think its something about hardware, battery or cpu, if anybody can help me, pls do it ;D im raging when my phone turns off in the middle of youtube video… thank you for reading...

Chosen Solution My phone rings 3 times does not show who us calling an no way to answer what is wrong my phone is 4months old Hi Mary, sounds like a software issue. I’d highly recommend a Hard Reset after backing up things you don’t want to lose. Good luck!

Chosen Solution I dropped my Lenovo Yoga C740-15IML on the corner where the power button is and damaged it pretty well—the bottom, back and side metal housing are all slightly bent now as a result. The laptop powers on fine still (!!) but when you move the screen forward or backwards the laptop loses power—not just the screen powers off but power is lost to the entire machine and it goes through a disk repair cycle when it restarts (assuming because it wasn’t powered down correctly)....

Chosen Solution Hello there. When I first bought the Lenovo V310-15IKB laptop, everything was working as intended, after some years problems with USBs started showing up. At first, the USB 2.0 port stopped recognizing USB 3.0 devices, then it stopped working completely. After some time, one of my USB 3.0 ports stopped working with USB 2.0 devices, and then the same problem appeared in the other USB 3.0 port. Now I have no way to use any USB 2....