Chosen Solution One day I came back from the washroom and I saw my ipad mini 2 wont turn on. As in no signal of life. I started panicking but then I tried charging the ipad it charged then I saw the apple logo and it glitched out and again black screen. I tried this numerous times and everytime the screen grew a little dimmer and finally after a few tries It did not show any sign of life....
Chosen Solution My touch screen works but the key board that attaches to the screen portion dose not work at all , worked a couple of times..but will not function, bought a second key board and attached it and still nothing….and no more warranty waited to long The metal connectors could be damaged. Do they looked scuffed or damaged in any way?
Chosen Solution I was watch movies on my TV but suddenly a horizontal dotted line appears across the screen , I’ve tried to turn it off for a while , applied pressure to the edge of the screen but it doesnt seem to work minhcool69 let us know what make and model your TV is. Horizontal lines are usually caused by a failed gate drivers. Those are usually mounted on a flex cable which is bonded to the LCD panel....
Chosen Solution It overheats and lags while playing on medium graphics, the battery is on 87% health but if it heats while off and charging, could the battery need replacement? I use a 5 watt apple charger hello Hadi, you have a short circuit in the installation. If you can run the phone and it heats up a lot, it could mean that the problem is with the accessories. This will confirm the battery life....
Chosen Solution The turn on off switch somehow controls the volume and my volume control buttons arent working because the screen shows the volume always going up or silent and I cant control the sound at all Btw I touched it with wet hands Hi it sounds like your Flex Power & Volume Cable for the LG K7 is broken. It isn’t a very hard repair and it’s relatively cheap to do....
Chosen Solution I have just replaced the screen on my iPhone 11 and the LCD backplate is not sitting flush against the screen. I was able to install it onto the housing however there is still a visible backlight through the top of the phone. I was wondering if anyone knows a way to have it sit flush and stop the backlight leak. Thank you. hello Jason, you forgot about the brackets that hold the sensor unit and loudspeaker in place....
Chosen Solution Lenovo X270 new keyboard recently installed, now it goes to sleep randomly, tried all solutions given Hey Deborah, I haven’t heard of a keyboard having anything to do with power options. I would make sure that the keyboard was installed properly first. (Not saying it wasn’t, just something to check) From there I would head to the Control Panel and check your Power Options. Hope this helps. The instructions were not perfect on You Tube and to say do the reverse to put it back together didn’t help a whole lot....
Chosen Solution Q: MacPro refuses to wakeup. Clicking either the mouse, trackpad, keyboard, or front power button, fails to work . I have to remove and reconnect the power cable to Reboot. Sometimes I need to repeat this steep because the power button fails to do the job. This Mac is a Mid 2010 2.8GHz Quad-Core Intel Xeon refurb from Apple, running macOS Sierra 10.12.6 w/ 8 GB DDR3 Memory, ATI Radeon HD 5770 1024 MB....
Chosen Solution hey, I have change my battery six month ago with a iFixit kit. Everything was going well. I am in holiday in the Caribbean, when I plugged the charger the first time (It was running out of battery), I had a very short (0,2s) green light on the Magsafe, then it stopped. And since my mac won’t charge at all (no light), I tried the different NVRAM and SMC, with an other Magsafe charger (a friend have exactly the same mac and doesn’t have any problem…) - nothing....
Chosen Solution So, looking for concurrence of a diagnosis from those who are WAY smarter than me! I’ve read similar posts on this topic, but none exactly like this situation. Early 2015 MacBook Air suddenly shut down and wouldn’t turn on. Resetting the SMC and the PRAM made no difference. Connected charger is orange, and then turns green to signify a full battery (which it had). After removing the bottom cover and disconnecting the battery, the laptop will power back up and run and continue to run if I reconnect the battery and disconnect the charger....
Chosen Solution Used to work great. Usually cleaned up fine. Now red clean light comes on every time. I have cleaned it up better than new, no luck. Ionic PRO Turbo air cleaner, not other of similar name. In the manual (model ca200) it mentions that moisture on the blades (they need to be perfectly dry) or that the unit needs to be reset (just press the on button) can cause this error....
Chosen Solution I have a Sony Experia Z2 tablet from verizon that I am trying to find a screen replacement for, but everything except the verizon websites seems to think the Sony z2 is a 5 inch phone instead of a 10 inch tablet. :/ Anyone know what the deal is? The model number is sgp561. Thanks! The best way to search is by typing “LCD Assembly SGH561. This screen is a glass and LCD fused screen....
Chosen Solution My bluetooth module doesn’t turn on anymore. It’s like it doesn’t even exist in the system.I tried reset smc, nvram, reset the module, delete plist files, etcIs there a way to troubleshoot it to check if the problem is the module itself?Is there a way to replace it?Thank you! See if Bluetooth is working by clicking on the menu icon while pressing the Option key are you able to see its settings?...
Chosen Solution Cat chewed through mic cord that connect to adaptor. Any way to fix this? Please help Sure! It should be easy, as it is an analog headset. There are four wires. Cut away some of the outer cord. Put a big shrink tube over the entire cord, and little ones on the inner wires. Wrap the copper ends of each strand together (red needs to touch red, black to black, etc....
Chosen Solution My electrical is fluctuating off and on battery is good starter is new Ronnie Row, If battery is indeed good 12.4+ volts and starter is new and tested to be good and you only get a click noise when trying to start, the connections on/from battery to starter or from on/battery to grounding point could be loose/ corroded/ damaged. Maybe clean/retighten battery terminal and connection points and if no go try giving the car a boost with cables, just to rule out a weak battery....
Chosen Solution got mid 2011 21” imac, i disassembled it all (without removing heatsink), cleaned both fans and motherboard and installed everything back into case. Fans acting as usual on start, but then starts rotating faster, after 1 or 2 minutes. and even more faster and louder if im watching movie. If i close the movie - fans wont get back to normal silent speed( Any guess? Thanks Update (02/24/2019)...
Chosen Solution dear team i have a problem that broken jack inside my out put 3.5 sound and i couldn’t take it out and the problem now even the internal speaker not working i try every thing rest SMC update software every thing and still showing block its working only in booting the OS but after that is showing no input regards Update (01/25/2019) It sounds (pun intended) like the operating system continues to think that there’s something plugged into the 3....
Chosen Solution Hello. I suddenly got a problem with my ipad. It has been very reliable until the problem arose. I sat and worked on the ipad. Then it got a restart. The Apple logo appeared, and then it was started again. Thought this was weird then, but kept using it. Then it happened again and again and again ….. This happens even if it is connected to power. Have not had any problems with the battery....
Chosen Solution Here is the situation: I tried to start up my Macbook a week or so ago and it wouldn’t start up. Turns out my off brand replacement battery was junk. So I got a new one and installed it. The computer started up and charged with no problem. The next day, it wouldn’t turn on. I messed around with it a bit and found online that resetting the SMC and PRAM may help....
Chosen Solution my oil come son if i drive for an hour continuously about oil level if just above maximum car was recently serviced the oil pressure sensor was replaced about 4 months ago Hi, Check that you have the correct oil filter installed and also the correct grade of oil as this could affect the flow of oil through the engine.. You may have to get the engine oil pump tested (oil pressure test) to check if the oil pump is OK or if there is something else wrong with the lubrication system in the engine....
