Chosen Solution My iPhone 5 screen will not close all the way after installing the new screen yes it will. of course, you’ll have to figure out where your frame is not square and dremel tool or g-tool it back to square, and make sure you’ve got your side screws correctly screwed in and that your battery isn’t bumped over too much. But it will close! Careful not to crack it!...
Chosen Solution my laptop screen tuch is not respond lidie ngassa you have to rule out software issues first. try what is being suggested by Lenovo Try performing a power drain first, remove all peripherals connected into it including its charger then press and hold the Power button for 10 to 15 seconds. Once done, turn it back on and test the touchscreen again. Launch the Lenovo Vantage app and search for available driver updates....
Chosen Solution I already used this laptop for around 9 months and never run into any problem yet. Around 1 hour ago, I was browsing the internet and it suddenly turned off. Tried to turn it on, but nothing happened (the light indicator for power is not on too). The battery was around 50%, so I tried to charge it. When I charge it, the light indicator for charging is on....
Chosen Solution On my Acer laptop there is two orange flashing lights on the side, it won’t turn on, I’ve tried turning off all power adapters and holding it down for 30 seconds. Nothing has worked and it’s still not turning on, can someone please help me When the battery charge is low the orange light will blink slowly. When the battery charge level is critically low (less than 3%) the orange light will blink rapidly....
Chosen Solution Hi. I have lenovo A7 maybe with me. my problem is when i connect with the charger the screen will come out showing the lenovo start up and battery charging percentage then screen out. when i turn on the power button it does not start. why is this happening? You have a problem with your main battery - logic board cable. To fix it replace the power to logic board cable....
Chosen Solution Idont know what to do ؟ pleas help me! !! @kar465 that flashing is usually caused by the carbon brushes on the motor. WE would have to see what that looks like. you can wither post a short video or even a couple of pictures of where you see those sparks. If it is the brushes, replacing those will most likely fix this. KitchenAid KSM150PSER Carbon Brushes Replacement Adding images to an existing question
Chosen Solution I replaced the screen on my K20 and had to use a couple of the ribbon cables from the old display as they did not come on the new ones. I have a feeling that I damaged one but do not know which to inspect further if this is the issue as they all look to be intact If you have your old screen even if it doesn’t work just put it back in and call your phone....
Chosen Solution laptop not used for 6 mo to a year. cant find power adapter ordered new one. used universal adapter plugged into car lighter socket did not notice any charging lights come on or any sounds smells etc but realized that I may have reversed the polarity on the charger tip. so until I receive power adapter have no way to charge battery or run computer without battery because the universal power is not charging or powering laptop....
Chosen Solution I spilled a little bit of tea on my MacBook Pro 15” Touchbar 2017 Kaby Lake just above the speaker on the left. In the left bottom corner there is a watermark that makes the screen brighter. What’s the best way to dry it? Can I open the LCD screen somehow and clean it on my own? Will it dry on it’s own? Should have dried on its own, right?...
Chosen Solution I have a really weird, stupid problem, its not my first time a do a repair on apple laptops, i just never had this stupid problem before, i did change a dead hard drive, its not my laptop, its from a friend, so he trusted me his beloved PB G4 to change the hard drive and reinstall all of its software, i did open the device, i did change the hard drive succesfully, but now, when i did reassemble the unit, EVERY single screw did get back in without ANY problems, accept for this long screws, 3 of em just won’t get in, they get in a lil bit, and then the screw just jams, it gets stuck, and then i have number four, and she will get in any hole without any problems, and i did check the screws under a magnifying glass, and they are NOT broken, the screw just looks EXACTLY the same as the one that goes into every hole!...
Chosen Solution This laptop once lost video completely. Took it to apple, and they said oh it’s the display. $600 to fix it. I then asked, well can you hook up an external display to show me it’s just the display? The genius said oh yeah, we should. Well it didn’t work. Apple wanted $700 to refurb it and make it work again. I had someone repair it and it worked great for a year....
Chosen Solution lost sound on model E371 VA TV Hi @cariari7 , Assuming that you have checked that the audio setting is set to the TV speakers and that the mute button and volume controls are working OK. Try a power reset. Switch off the TV and then switch off and disconnect the power cord from the power outlet. Press and hold the TV’s power On button for 30 seconds and then release....
Chosen Solution The day before the MacBook Air died it notified me the battery needed replacing and laptop would immediately shut out if disconnected from mains power as the battery wasn’t holding any charge. The next day, having been left connected to mains power overnight the laptop won’t turn on and the MagSafe 2 light is off. I tried a different connector and it still didn’t work. I have now replaced the battery but this didn’t work....
Chosen Solution Hi all, I havean issue with my Macbook pro retina 13 2014: despite high CPU usage, the fan spins constantly at 1300 RPM, which causes the CPU temperature raise up to 80C. All temperature sensors seem to work fine and I can manually adjust fan speed as well as it can be changed by MFC. Also i tried 3 different fans and the situation doesn’t change. I tried to reset SMC, pram and to reinstall the system (was cooling down CPU manually, don’t ask how) Atm i am using MacFanControl to regulate the speed of the fan, but the issue is still present and causing some discomfort, like i can’t install new OS because MFC doesn’t run during OS installation and i am afraid of overheating....
Chosen Solution Hello, My Magsafe 1 85W broke down. I have the idea to desolder the cord from the magsafe pcb and attach it to my regulated dc power supply (max 30V & 10A). I would set it up to 16.5V… is that possible at all? I know there is a lot of stuff in those magsafes. Thanks! Update (11/09/2017) No i want to hook that cord up to this:...
Chosen Solution Music stop playing while listening on new phone All complaints on Google. Why are you oblivious to what going on…. Well It is a Chinese mass production phone, there’s half the problem.
Chosen Solution I have a macbook air mid 2012. Now it says that service is needed for my battery. So we had the SMC reset and let it fully charge and let it fully discharge. But first coconut said that my fully charge capacity was 74% after the cycle only 51% and after recharging back again at 73%. Has anyone an idea what’s wrong and how to fix it? If you go to Applications –> Utilities –> System Report –> Power, it will tell you the condition of the battery....
Chosen Solution It was always working fine, but didn’t use it for about 6 months. It only acts normal when i just jut the right button on the lcd screen. Then it closes the lens, makes no noise, and i can just review my recordings. But once i turn it in shooting mode it starts ticking and buzzing and the lens seems to be flickering. What should I do? Hi Rebecca, I think you should try to disassemble yourcamera and try to reconnect camera chip on motherboard,because in most cases camera chip just disconnected from motherboard....
Chosen Solution hi, when my phantom 3 standard fall , camera wont to be stable and its keep shaking ? I checked the flat vision and gimbals cable there is nothing wrong with it ? what can I do to get it fix thank you i had this same thing happen to my phantom 4 i had to replace the entire camera assembly. they told me it had to do with the motor not being about to stabilize anymore....
Chosen Solution How can i use my screen or ssd as external devices and processor too heres How to replace the logic board: MacBook Pro 13" Retina Display Mid 2014 Logic Board Replacement
