Posts

Chosen Solution My iphone 7 plus dropped and a minor spot came into the screen very small spot and another day my mobile dropped and that spot goes to another place. What’s the solution of this spot? hello Arslan, it’s an imprint on the inside. A wrongly inserted bolt probably fell out. It happened to me that a similar imprint on the screen was caused by a broken capacitor, which was soldered by some lazy technician with insufficient care....

Chosen Solution I have recently purchased a motherboard and CPU. The guy i bought it from, used dual channel 2*4GB RAM in his configuration. When I got the parts, I tried using an 8GB Stick in the first RAM slot. The pc could not start, and it started beeping. Then I moved the RAM into the secon slot on the motherboard and the PC started working perfectly. Then i wanted to put a second RAM into the RAM slot, that was not working, but oddly, the coputer could not start, started beeping, so basically the same stuff that happened when only one stick was inserted....

Chosen Solution when i try to turn my volume down it doesn’t work please help me If all keys are working fine but only volume down not working means you have to change volume switch or if there is no any switch clean it and check, hope your problem solved.

Chosen Solution so I put my phone in my bag with my perfume and other stuff when I wanted to take it out I saw that it was wet and then smelled the perfume my perfume somehow leaked and my phone touch and other buttons don’t work I can charge it but id doesn’t work I did put it in rice but its been there for like 6 days the sound did start working and some other buttons but the phone touch still doesn’t work I don’t know how to fix this someone please help...

Chosen Solution i have bricked my phone while flashing and got locked my bootloader . how to fix .. plz help If you can enter fastboot mode (volume down + power button) you can use the xiaomiflash tool. For that you have to download the stock rom from https://androidmtk.com/download-xiaomi-s… and flash it using the xiaomiflash tool

Chosen Solution when the charge become less than 50% my Phone screen stop Suddenly and dosent work. then i remove the battry and i will retern and when i turn the phone i find 0 % in the charge. Sounds like the battery is faulty and not holding its charge, I’d start be replacing the battery - you shouldn’t really need a guide to do this. Your battery may be bad and needs to be replaced....

Chosen Solution @jar7050 Sounds like the SSD is faulty if it doesn’t get recognised both ways. Don’t you have around your older drive for testing by any chance ? Update (10/24/2019) From your update, I’d say that as already pointed out, probably your N1 is faulty. N2 and N3 can’t be recognized as unformatted or not compatible file system. N4 doesn’t have an OS installed. You’ll need your original install Dvd or a Usb pendrive with any Mac Os you wish to install up to 10....

Chosen Solution After replacing the screen on my iPhone 5s (16GB white and silver) the left side has some daed spots, I cannot press ‘Q’ or ‘1’ in portrait, the bottom left icon also doesn’t work. What should I trouble shoot? There are no strange lines or screen bleeds. I would open it back up again and reconnect the digitizer cable, maybe there is some dirt in the connector? Give it a wipe with isopropyl if you have any....

Chosen Solution Its only few months for my new GSM760PZXZ Fridge/Freezer and it does not cool any more. The noise of the compressor has also changed. Evaporator fan works fine, no dust in condenser, condenser fan works, compressor also seem to work. Cant find any evidence of gas leaking either (although there are some bluish oxide like thing on some of the copper tubes). Its still covered with the warranty but I moved out of UK and my warranty only applies to UK....

Chosen Solution Hi Lg g pad2 suddenly does not charge beyond 5% . It turns on automatically after 5% of charge. Pops LG logo Then goes to next screen LG U+ here it freezes for ever. Upper Back gets heat up until batter becomes zero. Please guide @dmic this “Upper Back gets heat up until batter becomes zero. “ usually equates to a short circuit somewhere. I suggest you start with a new battery....

Chosen Solution Usually it will work for a while until it goes black with the said flickering on top. Sound works and the image for a random amount of time. Any tip to fix it/ broken component(s)? The first image its the tv working normally, the second when it goes black and the third an odd angle of the back of the tv. FYI the image got better as I played around with the tv, before there were a lot of colored stripes and the image quality was awfull....

Chosen Solution iPhone 8 does not recognize headphones or charger but will hold a charge when placed on wireless charger. Headphones and power cord are new and work with other devices. Charge port is not dirty since it is new. The phone does turn on when plugged in, but again, no charge and can’t use headphones. You probably purchased a faulty charge port or was this why you changed it to start with?...

Chosen Solution The dryers outer latch has broken and will no longer keep the door latched, therefore will not register as closed and will not begin the dryer cycles. Is there a replacement part or something I can do? Duct tape has been my macguyver quick fix for now Hi, Is this the part you mean? If not here’s a link to the door parts for your model dryer. Hopefully this is of some help....

Chosen Solution I have the same problem, the monitor would make loud snapping cracking sounds every now and then. Is there anyway to check the Caps or resistor visually as I’m not an electrical engineer, but can sort of solder a component if I need to. Hi Ian, The visual check for blown electrolytic capacitors is to check the top of the cylinder. It should be flat with an ‘X’ shape in it....

Chosen Solution My Vizio all in one Ca27-A0 (discontinued) pc doesnt show anything on pc on boot after harddrive upgrade, so I opened it up again found the bent pins on the lvds connector on the motherboard, I just want to know what are my options right now? Hello Reda, based on what you describe you may have a few limited options.. Reposition the bent pins using fine tweezers (very gently!...

Chosen Solution My sister spilled apple juice over her Early 2015 Macbook Air, and failed to switch it off immediately… I managed to disassemble and clean it by following these excellent instructions so it at least boots again, but the backlight is broken. When pointing a flashlight to the display, it looks as if the LCD itself is not damaged afaict. Searching the internet I found hints that it might be possible to fix this issue by replacing a fuse o a FET or a driver IC....

Chosen Solution I was moving and put my MacBook Air into a box of electronics where it was kept in a laptop sleeve. Today I took it out and I noticed that two screws on the bottom of the laptop are protruding through the laptop and are sticking into the inside of the machine. The machine still works fine however the trackpad doesn’t click down. The screws themselves are protruding through the bracket (not sure if this is the right word to use) that prevents them from being screwed in any further....

Chosen Solution I was in a Zoom conversation when my MacBook suddenly turned off. The light for the battery kept being Green. I have tried diagnostic the issue myself and this is the behavior: When power cable is plugged in the light is greenWhen I do the shift+cmd+opt+on button light does not flickerI have opened the back and disconnected the battery:With the battery disconnected and the cable connected the light is AmberIf I do the long shift+cmd+alt+power reset at release the light flashes green and then it comes back to Amber Still it does not seem to turn on....

Chosen Solution Hi. I hope someone can help me sort the problem out. I was doing some work when my MacBook Pro suddenly shut down and wont turn at all. I tried everything from the SMC Reset and those 10 seconds hold of power button to almost everything of what I found with some solutions on the internet, but unfortunately it didn’t do any good. Here’s one of the symptoms I’m actually experiencing which made me think that I’m actually having a faulty battery....

Chosen Solution Hey everyone, as the title says, when I try and install MacOS High Sierra it only pops up with this message. Backstory: I previously installed Catlina on this computer with dosdude1 patcher. I can’t find any info online with this kind of pop up message. Dear iFixit gods @danj and @mayer please help. This could be an issue with the system firmware. The OS installer maybe because the firmware level is not recognized by the installer....