Chosen Solution
Model 970-C45092-30 will fill with water, agitate both directions drain the water but will not do the last quick spin. The digital timer just ends the cycle with anywhere from 7 - 11 minutes to go, cycle dependent. I cleaned out every Jose and the drain trap. Door clicks when it locks. It just won’t spin. Cheers
Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it. Cause 2 Motor Coupling The motor coupling connects the motor to the washing machine transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it. Cause 3 Drive Belt Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
You can check if it is set to mode that not remove the water from cloths. there is a lot modes to set on it. Search for the manual. Maybe there is a reset settings somewhere. Else it is maybe an internal circuit problem.
What about your pump?
